Highland · Scotland
Bath Re-enamelling in Corry
Bath re-enamelling in and around Corry: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Several chips and rust patches
Bath re-enamelling in Corry, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. If you’re dealing with several chips and rust patches and brown or grey marks that don’t clean off, we can typically put it right, on basins & shower trays, cast iron baths and Victorian roll-tops alike.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Corry (IV49)
- Region
- Highland
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Prices and what affects them
Prices start from £350. There’s no area surcharge for Corry. The price reflects:
- The material and finish
- The colour and finish to match
- Previous DIY repairs that have to come out
- The type of damage
We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what we need:
- Any details about the material
- One sharp close-up of the damage
- Natural light rather than flash
- One picture of the entire bath
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Your questions about bath re-enamelling in Corry
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Does re-enamelling smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
How long will the bath be out of use?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can you repair something that’s been repaired before?
Typically, yes. The old repair comes out first.
What we cannot put right
Before you book, it’s worth knowing the limits:
- A bath split right through the body
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Aftercare tips
To keep it looking its best:
- A dripping tap should be fixed promptly
- Respect the curing time we give you
- Rinse off hair dye, oils and bath bombs straight away
- Have chips seen to early
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
What happens on the day
Arrival times are agreed in advance. On site, it takes the best part of a day for most jobs. The room is left tidy and ready to use once it has cured.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Open a window if you can
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Advice
About Corry
Corry is in Highland. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our technicians cover all 253 towns and villages across Highland.
Jobs in IV49 are booked in the same way as anywhere else. Streets in the area include Ford Road, Riverbank and Liveras Park. Close by, we cover An t-Àth Leathann (1 mile south), Blackpark (1 mile south-east), Harrapul (1 mile south-east), Kyleakin (7 miles east) and Kyle of Lochalsh (8 miles east). Remote and island addresses take a little more planning, so it’s best to call first.
What’s near Corry
Locally, our jobs take us to homes close to Broadford Parish Church and the streets around them. Other landmarks nearby include Mackinnon Memorial Hospital (within half a mile north). Green spaces nearby include Bheinn Shuardail and Lochan Cruinn.
Work for landlords and builders
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
When to call us in Corry
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Customers usually contact us about:
- Chips and rust in more than one place
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
What your quote should include
- If travel is included in the price
- How the room is protected while they work
- When it can be used again
- Whether the colour is mixed to match
Should you replace it?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Compared with replacing, repairing generally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Corry
- Colours mixed by hand to suit your surface
- We leave the room as we found it
- Most jobs done in one visit
- Technicians who travel to you, UK-wide
Take a look at our full price list and bath cost comparison.
Nearby places to Corry
More services for Corry
About our accreditations · Every repair comes with a one-year guarantee.
