Devon · England
Bath Re-enamelling in Blackpool Corner
Problem with your bath in Blackpool Corner? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- An old resurfacing that’s failing
- An outdated colour you’d like to change

Should you replace it?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- Repair technicians who travel to you, UK-wide
- CHAS and Constructionline accredited
- Every repair guaranteed for a year
- Everything repaired in place
See our pricing and bath cost comparison.
How we handle bath re-enamelling in Blackpool Corner
Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. We regularly repair pressed steel baths, acrylic baths and Victorian roll-tops, and people most frequently call us about an original cast iron bath that needs restoring and an outdated colour you’d like to change.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Location
- Blackpool Corner (EX13)
- Region
- Devon
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026

What happens on the day
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to a full day, including clearing up.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Have a window or extractor fan available
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Related advice
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Looking after it afterwards
So the finish stays in good condition for years:
- Use washing-up liquid and a soft cloth
- Get any chip repaired quickly
- Dry the bath after use to stop limescale
- Don’t let dyes or oils sit on the finish
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Prices and what affects them
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- The colour and finish to match
- Whether we combine several jobs
- What kind of damage it is
- Previous DIY repairs that have to come out
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Quotes from your pictures
Photographing the damage takes a minute. Try to send:
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- A picture taken from further back
- The material, if you know it
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Common problems we fix in Blackpool Corner
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Common reasons people in Blackpool Corner contact us include:
- Wear marks under the taps
- Brown or grey marks that don’t clean off
- A coloured bath you want in white
- A bath that stays dull however much you clean it
What to look for in a quote
- What happens if they find more damage
- What protection goes down before work starts
- How soon you can use it again
- How the colour is matched
Places near Blackpool Corner
Also in Blackpool Corner
Honest limits
A repair is not always the answer, and we’d rather say so up front. Repairs won’t solve:
- Problems we cannot see until an old finish comes off
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Blackpool Corner questions
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Do you work in Blackpool Corner?
Yes. We work across the UK and come to Blackpool Corner and the rest of Devon. Send photos and we’ll quote, or call 0345 017 0787.
Do the materials smell?
Expect a mild smell while we’re working that clears as it cures.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Do you cover the entire of Devon?
The entire UK, including all of Devon. Just include your postcode and we’ll confirm dates.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do you charge for travel?
We don’t add a call-out fee. Your fixed price includes everything.
Blackpool Corner and nearby
Blackpool Corner is about 7 miles south of Chard, in Devon. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 586 towns and villages across Devon.
Here we cover the EX13 postcode area. We also travel to Monkton Wyld (1 mile south), Raymond's Hill (1 mile south-west), Hawkchurch (1 mile north), Sector (1 mile west) and Harcombe Bottom (2 miles south). Larger places within reach include Sidmouth (14 miles south-west), Honiton (11 miles west), Seaton (8 miles south-west), Ottery St Mary (15 miles west), Colyton (6 miles south-west) and Sidford (14 miles south-west).
Near you in Blackpool Corner
In Blackpool Corner, that means homes near St Andrew's Church and Axe Valley Academy and the streets around them. For rail, the closest station is Axminster station, about 2.8 miles west. Well-known places in the area include Marshwood Castle (4.2 miles east) and Axminster Hospital (2.4 miles west). Green spaces nearby include Lambert's Castle Hill.
About our accreditations · Every repair comes with a one-year guarantee.

