Devon · England
Bath Re-enamelling in Raymond's Hill
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Raymond's Hill. Free, fixed quotes from your pictures.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A dull, rough surface that won’t come clean
How we handle bath re-enamelling in Raymond's Hill
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Whether it’s an outdated colour you’d like to change and lots of chips and rust spots, we can help, whatever the material.
You get a one-year guarantee, the same in Raymond's Hill as everywhere else we work.
- Location
- Raymond's Hill (EX13)
- County
- Devon
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Raymond's Hill
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- The type of damage
- How much damage there is
- What the surface is made of
- Where the damage is and how we get to it
The price reflects the work involved, not where you live. You will see the full price before you book.
How to get a fixed quote
We price nearly every job from pictures. This is what to send:
- What it’s made of, if you know
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
When we would advise against a repair
Before you book, it’s worth knowing the limits too:
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
- A cast iron or steel bath that’s cracked right through
Send us pictures and we will tell you honestly.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Raymond's Hill: your questions answered
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
What areas do you cover?
We cover the entire UK, including Raymond's Hill and the rest of Devon. Send your postcode with your pictures and we’ll confirm dates.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- Most jobs done in one visit
- Colours mixed by hand to suit your surface
- We will tell you if it’s not worth repairing
- No extra charge for your area
Read our prices page or resurfacing vs replacement cost guide.
What we do, step by step
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
- Clear the area around the damage
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Related advice
Raymond's Hill and the surrounding area
Raymond's Hill is about 8 miles south of Chard, in Devon. Whether you are in the middle of Raymond's Hill or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Raymond's Hill is one of 586 places in Devon where we work.
Postcode districts we cover here: EX13. Local streets include Crewkerne Road, Green Lane and Cooks Lane, and we cover them all. Close by, we cover Monkton Wyld (1 mile east), Harcombe Bottom (1 mile south-east), Yawl (1 mile south), Sector (1 mile north-west) and Blackpool Corner (1 mile north-east). We also work in nearby towns such as Sidmouth (13 miles west), Honiton (10 miles west), Seaton (6 miles south-west), Ottery St Mary (14 miles west), Colyton (5 miles west) and Sidford (12 miles west).
Near you in Raymond's Hill
In Raymond's Hill, that means homes near Axe Valley Academy, Hunters Lodge Inn and St Andrew's Church, among other places. Raymond's Hill’s nearest station is Axminster station, roughly 2.2 miles north-west of the centre. Other landmarks nearby include Charmouth Heritage Coast Centre (3.3 miles south-east) and Colcombe Castle (4.8 miles west). The countryside around Raymond's Hill includes Lambert's Castle Hill.
Signs you need bath re-enamelling in Raymond's Hill
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
People generally call us after spotting one of these:
- A roll-top that is seen better days
- Several chips and rust patches
- Wear marks under the taps
- Staining under the taps and around the waste
Before booking anyone
- What prep work is covered
- Whether a trained technician does the job
- Aftercare advice
- What the guarantee covers, and for how long
Keeping it looking good
Simple care helps the repair last. We recommend:
- Wipe the bath dry after use in hard water areas
- Do not let dyes or oils sit on the finish
- Repair dripping taps early
- Use washing-up liquid and a soft cloth
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Nearby places to Raymond's Hill
More services for Raymond's Hill
About our accreditations · Every repair comes with a one-year guarantee.
