Pembrokeshire · Wales

Bath re-enamelling & resurfacing in Blaenffos, Pembrokeshire

Our technicians come to Blaenffos for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.

  • Resurfacing from £350
  • A dull, rough surface that will not come clean
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Blaenffos

How to look after the repair

A little care keeps the finish looking good. Our advice:

  • Avoid suction-cup mats
  • Wipe the bath dry after use in hard water areas
  • Stick to gentle, non-abrasive cleaners
  • Have chips seen to early

Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.

Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.

Bath re-enamelling in Blaenffos without replacing anything

A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. If you’re dealing with a bath that stays dull however much you clean it and staining under the taps and around the waste, we can help, whatever the material.

You get a one-year guarantee, the same in Blaenffos as everywhere else we work.

Location
Blaenffos (SA37)
Region
Pembrokeshire
Warranty
A year, on every repair
Quote
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026
Before and after: an old basin refinished to bright white

DIY kit or professional repair?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

How we price bath re-enamelling

Prices start from £350. You will know the full cost before booking. We take into account:

  • The colour and finish to match
  • Whether old repairs or coatings need taking off
  • How much damage there is
  • What the surface is made of

A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Send pictures for a quote

You can normally get a fixed quote without us visiting. To make it quick:

  • A clear, close picture of the problem area
  • A coin beside the damage so we can judge size
  • Any earlier repairs or coatings
  • One picture of the whole bath

A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. You will get a fixed price, not an estimate.

When we would advise against a repair

In fairness, some problems need a different fix:

  • Problems we can’t see until an old finish comes off
  • Holes rusted through the metal
  • Leaking taps or wastes (a plumber’s job)

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Blaenffos

  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths

How the visit works

Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. Allow a full day, and we will keep you posted as we go.

  1. First we protect the bathroom and set up ventilation.
  2. Next we degrease the bath and fix chips and rust spots.
  3. The surface is prepared and a bonding primer applied.
  4. Several coats of new finish are sprayed on.
  5. We leave it to cure, and it’s usually ready the following day.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Clear the area around the damage
  • Mention any parking restrictions or tricky access

Getting a price

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Get a free quote

Read more

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

For anyone letting property in or around Blaenffos, we’ll quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.

Do you need bath re-enamelling in Blaenffos?

Hard water speeds up the wear, and abrasive cleaners do the most damage.

You may need us if you’ve spotted:

  • A bath in a colour that no longer suits
  • Several chips and rust patches
  • Enamel that’s lost its shine and feels rough
  • An old resurfacing that is failing

Before booking anyone

  • Whether a trained technician does the job
  • A fixed quote, and whether VAT is included
  • Whether cleaning and preparation are in the price
  • What aftercare is recommended

Choosing a repair company

Blaenffos and the surrounding area

Blaenffos is about 17 miles north-west of Carmarthen, in Pembrokeshire. Whether you’re in the middle of Blaenffos or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover 223 places across Pembrokeshire, from the larger towns to small villages.

Jobs in SA37 work the same way as everywhere else we cover. That includes homes on Clos-y-Gerddi and Blaen Treweryll. Nearby, we also work in Boncath (1 mile north-east), Llwyncelyn (3 miles north), Pen-y-bryn (4 miles north), Cilgerran (4 miles north) and Pen-Llyn (4 miles north). Within a short drive, we also cover Fishguard (14 miles west), Goodwick (15 miles west), Fishguard and Goodwick (14 miles west), Penyraber (15 miles west), Narberth (15 miles south) and Wdig (15 miles west).

Near you in Blaenffos

Other landmarks nearby include Tom Mathias Museum (3.5 miles north) and Castell Dyffryn Mawr (1.5 miles south-west). Open spaces near Blaenffos include Mynydd Crogwy and Teifi Marshes Nature Reserve.

Map of Blaenffos © OpenStreetMap contributors

What your bath is made of matters

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Common questions in Blaenffos

It’s been repaired before. Can you still fix it?

Generally, yes. Tell us what was done before.

How do I get a price for bath re-enamelling in Blaenffos?

Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.

Do you cover the entire of Pembrokeshire?

All of Pembrokeshire, and the rest of the UK. Travel is included in the price.

Do the materials smell?

Expect a mild smell while we’re working that clears as it cures.

What do you need from me?

Photos of the damage, a picture of the whole bath and your postcode. Then we’ll agree a date.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Is there a call-out fee?

We don’t add a call-out fee. Your fixed quote includes everything.

What happens once I’ve sent pictures?

We check the damage, the material and your postcode, then reply with a quote with dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.