Gloucestershire · England
Bath re-enamelling & resurfacing in Blaisdon, Gloucestershire
Bath re-enamelling in and around Blaisdon: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Stains that will not shift
- A coloured bath you want in white
Bath re-enamelling at your home in Blaisdon
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. If you’re dealing with a dull, rough surface that won’t come clean and an old resurfacing that’s failing, we can help, on pressed steel baths, Victorian roll-tops and cast iron baths alike.
You get a one-year guarantee, the same in Blaisdon as everywhere else we work.
- Where
- Blaisdon (GL17)
- County
- Gloucestershire
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Blaisdon questions
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Do you cover Blaisdon?
Yes, we do. We send a technician to Blaisdon for every job, with no extra charge for travel.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day, with the bath back in use the day after. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before you book.
Why us?
- Everything repaired in place
- Normally one visit, start to finish
- No extra charge for your area
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page and guide to resurfacing and replacement costs.
The process
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes the best part of a day. If anything looks different from your pictures, we will talk to you before going ahead.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Keep children and pets away from the room on the day
- Have somewhere for us to park nearby if possible
- Tell us if there are stairs or a lift
Get a quote
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
Read more
Do you need bath re-enamelling in Blaisdon?
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is usually as strong as ever.
Signs it’s time to call us include:
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- An old resurfacing that is failing
- A bath in a colour that no longer suits
What your quote should include
- What aftercare is recommended
- The length of the guarantee and what it covers
- What prep work is covered
- What happens if the damage is worse than the pictures show
Nearby places to Blaisdon
Also in Blaisdon
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
About Blaisdon
Blaisdon is about 7 miles west of Quedgeley, in Gloucestershire. Jobs in Blaisdon are booked in like any other job: a fixed quote from photos, then a visit to do the work. Blaisdon is one of 470 towns and villages in Gloucestershire where we work. We work right across the region, from Blaisdon to Birmingham (48 miles away).
Our visits in GL17 work the same way as everywhere else we cover. Close by, we cover Little London (1 mile north), Northwood Green (1 mile south-east), Longhope (2 miles north-west), Huntley (2 miles north-east) and Dursley Cross (2 miles north). We also work in nearby towns such as Cheltenham (15 miles east), Gloucester (8 miles east), Stroud (11 miles south-east), Tewkesbury (15 miles north-east), St Paul's (15 miles east) and Lansdown (15 miles east).
Local landmarks in Blaisdon
Our customers here include homes close to Dene Magna School and Church of St Michael and All Angels, among other places. Other landmarks nearby include Aston Ingham (3.7 miles north) and Dilke Memorial Hospital (4.8 miles south-west). For a walk, there is Wigpool and May Hill.
Landlord and trade work in Blaisdon
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Blaisdon as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
When we’d advise against a repair
In fairness, there are a few things a repair will not fix:
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we will say what we think.
Materials we work on in Blaisdon
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job, from your photos. The main factors are:
- Whether we combine several jobs
- The colour and finish to match
- How easy the damage is to reach
- The size and number of damaged areas
A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Quotes from your pictures
When you take your photos, these tips help us give you a firm price:
- A clear, close picture of the problem area
- A wider photo showing the entire bath
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
