County Durham · England
Bath Re-enamelling in Mosswood
Full bath re-enamelling and resurfacing in Mosswood, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Stains that will not shift
- An old resurfacing that is failing
How we handle bath re-enamelling in Mosswood
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, with the bath ready to use the following day. Typical jobs include a roll-top that’s seen better days and a bath that stays dull however much you clean it, on pressed steel baths, Victorian roll-tops and acrylic baths.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Mosswood (DH8)
- Area hub
- County Durham
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Mosswood
What happens once I’ve sent photos?
We come back with a fixed quote, plus dates. There’s no obligation to book.
How do I get a price for bath re-enamelling in Mosswood?
Prices start from £350. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your DH8 postcode.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is repairing better than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll tell you when the room can be used again.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
What a repair cannot fix
It helps to know what we cannot do too:
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
Send us pictures and we will tell you honestly.
What we work on
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Don’t leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs straight away
- Leave the bath for the full curing time before using it
- Dry the bath after use to stop limescale
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What we do, step by step
We turn up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes the best part of a day, and we leave the room as we found it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Tell us about parking, stairs or access
- Ensure the area is dry
- Have somewhere for us to park nearby if possible
Getting a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Read more
What we’re called out for in Mosswood
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
The most common problems we are called about are:
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
- Wear marks under the taps
- Several chips and rust patches
Before booking anyone
- How to care for the finish
- Who will actually do the work
- Whether the colour is mixed to match
- How long the guarantee is and what it covers
Nearby places to Mosswood
More services for Mosswood
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- The colour and finish to match
- The material
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
The price reflects the work involved, not your postcode. You will see the full price before booking, with nothing added on the day.
Quotes from your photos
Almost every job we do is priced from pictures. This is what we need:
- A photo taken from further back
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
- A clear, close picture of the problem area
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Work for landlords and builders
If you manage property in Mosswood, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Mosswood and nearby
Mosswood is about 3 miles west of Consett, in County Durham. Jobs in Mosswood are booked in like any other job: a fixed price from your pictures, then a visit to do the work. We work in all 329 towns and villages across County Durham, from the larger towns to small villages. Our jobs stretch from Mosswood to Newcastle upon Tyne (about 14 miles away).
Here we cover the DH8 postcode area. Other places close to Mosswood include Allensford (1 mile east), Snods Edge (1 mile north), Healeyfield (1 mile south), Castleside (1 mile south-east) and The Grove (2 miles east). Further out, we also cover Durham (14 miles east), Consett (3 miles east), Chester-le-Street (13 miles east), Stanley (9 miles east), Crook (11 miles south-east) and Birtley (14 miles east).
Around Mosswood
Around Mosswood, we work in homes near Church of All Saints and Consett Academy, among other places. Other landmarks nearby include Shotley Bridge Hospital (2.8 miles north-east). Green spaces nearby include Skaylock Hill.
About our accreditations · Every repair comes with a one-year guarantee.
