Northamptonshire · England
Bath Re-enamelling for Blaston homes
Fixed-price bath re-enamelling in Blaston and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A roll-top that is seen better days
- An old resurfacing that’s failing
Bath re-enamelling in Blaston, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. If you are dealing with a period or roll-top bath worth keeping and thin, worn enamel in places, we can generally put it right.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.
- Area
- Blaston (LE16)
- County
- Northamptonshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Blaston
Blaston is about 6 miles north-west of Corby, in Northamptonshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 364 towns and villages across Northamptonshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 46 miles away.
Postcode districts we cover here: LE16. Other places close to Blaston include Hallaton (1 mile north-west), Medbourne (2 miles south), Slawston (2 miles west), Cranoe (3 miles west) and Ashley (3 miles south). Within a short drive, we also cover Corby (6 miles south-east), Kettering (11 miles south), Market Harborough (7 miles south-west), Desborough (8 miles south), Burton Latimer (14 miles south-east) and Rothwell (9 miles south).
What’s near Blaston
In Blaston, that means homes near St Giles' Church and South Axholme Community School, among other places. Other landmarks nearby include Hallaton Museum (1.4 miles north-west) and Rockingham Castle (4.6 miles south-east). The countryside around Blaston includes King's Hill and Great Merrible Wood.
Blaston questions
Will there be a smell?
Some materials have a smell while they’re applied. It fades as everything cures.
What happens once I’ve sent photos?
We review the photos and send a fixed quote and the next dates we have.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Which areas do you work in?
We cover the whole UK, including Blaston and the rest of Northamptonshire. Send your postcode with your photos and we’ll offer you dates.
Do you resurface freestanding baths?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Prices and what affects them
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- How much damage there is
- The material and finish
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Almost every job we do is priced from pictures. This is what we need:
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- Any earlier repairs or coatings
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
How the visit works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We clean up when we’re done and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the next day.
Preparing for the visit
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Advice
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Clean with a soft cloth and mild detergent
- A quick wipe after use keeps limescale away
- Don’t leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs right away
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
When a repair is not the answer
In fairness, there are a few things a repair won’t fix:
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
What else we do in Blaston
Repair or replace in Blaston?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. The price reflects the work involved, not your postcode. You will see the full price before booking.
Why Blaston customers choose us
- Nothing taken out or refitted
- Colour-matched on site
- Repair technicians who travel to you, UK-wide
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our full price list or guide to resurfacing and replacement costs.
Landlord and trade work in Blaston
For anyone letting property in or around Blaston, we can repair and quote for several addresses together. Send photos for each one and we will price them together.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
About our accreditations · Every repair comes with a one-year guarantee.
