Northamptonshire · England
Bath re-enamelling & resurfacing in Burton Latimer, Northamptonshire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Burton Latimer. Send photos for a free, fixed quote.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Chips and rust in more than one place
Bath re-enamelling in Burton Latimer without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re often asked to fix a bath in a colour that no longer suits and a roll-top that’s seen better days, in acrylic baths, pressed steel baths and Victorian roll-tops.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Burton Latimer (NN15)
- Region
- Northamptonshire
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
We begin by going over the job with you. Then the area is sheeted and masked and we start. You can expect it to take a full day, and we’ll tell you if anything changes.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Move bottles, mats and clutter away from the area
- Let us know if it has been repaired before
- Let the surface dry out before the visit
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Related advice
For landlords and businesses
Landlords, letting agents and housing providers in Burton Latimer use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- A bath that is rusted through
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Avoid suction-cup mats
- Use washing-up liquid and a soft cloth
- Do not leave a chip unrepaired
- Don’t leave bottles, razors or sponges standing on the surface
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Nearby places to Burton Latimer
What else we do in Burton Latimer
Prices and what affects them
Resurfacing from £350. There’s no charge for travel to Burton Latimer. The price depends on:
- Doing more than one item at once
- The colour and finish to match
- Whether old repairs or coatings need taking off
- How much damage there is
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Send pictures for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- What it’s made of, if you know
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- A wider photo showing the whole bath
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Common questions in Burton Latimer
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
What areas do you cover?
Across the UK, and that includes Burton Latimer. Prices don’t change with location.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
What happens after I send pictures?
You will get a fixed quote back, normally with dates to choose from. There’s no obligation to book.
Do you work in Burton Latimer?
Yes. We work across the UK and travel to Burton Latimer. Send photos and we will quote, or call 0345 017 0787.
Can you do the outside of a roll-top?
Yes. Inside and out.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Should you replace it?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Every repair guaranteed for a year
- No extra charge for your area
- One visit for most repairs
- CHAS and Constructionline accredited
Take a look at our pricing or guide to resurfacing and replacement costs.
Where we work around Burton Latimer
Burton Latimer is about 3 miles south-east of Kettering, in Northamptonshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 364 places across Northamptonshire, from the larger towns to small villages. You can also see our page for Birmingham, about 52 miles away.
Jobs in NN15 work the same way as everywhere else we cover. From High Street, Station Road and Coles Close or anywhere nearby, a technician can come to you. Other places close to Burton Latimer include Barton Seagrave (1 mile north-west), Finedon (2 miles south-east), Cranford St John (2 miles north-east), Cranford St Andrew (2 miles north-east) and Irthlingborough (4 miles south-east). Within a short drive, we also cover Northampton (12 miles south-west), Corby (9 miles north), Kettering (3 miles north-west), Wellingborough (4 miles south), Rushden (6 miles south-east) and Market Harborough (13 miles north-west).
Local landmarks in Burton Latimer
In Burton Latimer, that means homes near Church of St Mary the Virgin, St Mary's CE Primary Academy and The Latimer Arts College, among other places. The nearest railway station is Kettering station, about 3.1 miles north-west of the centre. Further afield, we also cover the area around St Mary's Hospital (2.8 miles north-west) and Manor House Museum (3.1 miles north-west). Not far away are Southfield Farm Marsh.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
