North Lincolnshire · England
Bath re-enamelling & resurfacing in Blaxton, North Lincolnshire
Fixed-price bath re-enamelling in Blaxton and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A coating lifting around the plughole
- A coloured bath you want in white
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We clean up when we are done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Make sure the area is dry
- Plan for the room to be out of bounds to pets and children
- Point us to the nearest place to park
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and you’re under no obligation.
Advice
How we handle bath re-enamelling in Blaxton
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. Common call-outs are for thin, worn enamel in places and an outdated colour you’d like to change, across cast iron baths, Victorian roll-tops and acrylic baths.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Blaxton (DN9)
- Region
- North Lincolnshire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we can’t put right
We will not take on work that won’t last, so here’s what a repair can’t put right:
- Problems we cannot see until an old finish comes off
- Steel that has corroded right through
- A cast iron or steel bath that is cracked right through
Send us photos and we will tell you honestly before booking.
What we work on
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Repair or replace: which is better?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why Blaxton clients choose us
- CHAS and Constructionline accredited
- A fixed quote before booking
- Generally one visit, start to finish
- Rooms protected and left tidy
Read our prices page and bath cost comparison.
Blaxton: your questions answered
What happens if you find more damage?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before.
Can you quote from photos?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Common problems we fix in Blaxton
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Most people contact us when they notice something like this:
- Worn patches where water runs and sits
- A roll-top that’s seen better days
- A coating lifting around the plughole
- Chips and rust in more than one place
What your quote should include
- How long it needs to cure
- The length of the guarantee and what it covers
- What happens if the damage is worse than the photos show
- If travel is included in the price
Our work in Blaxton
Blaxton is about 5 miles east of Doncaster, in North Lincolnshire. Jobs in Blaxton are booked in like any other job: a fixed quote from photos, then a visit to do the work. We cover 90 places in North Lincolnshire. We work right across the region, from Blaxton to Leeds (about 32 miles away).
Postcode districts we cover here: DN9. That includes homes on New Street, Park Lane and Blue Bell Court and the roads around them. We also cover the places around Blaxton: Finningley (1 mile south), Misson (4 miles south), Newington (4 miles south), Everton (6 miles south) and Drakeholes (7 miles south). Further out, we also cover Scunthorpe (15 miles east), Bottesford (13 miles east), Frodingham (15 miles north-east), Crosby (15 miles north-east), Epworth (7 miles east) and Yaddlethorpe (14 miles east).
What’s near Blaxton
Locally, our jobs take us to homes close to St Oswald's CofE Academy, Church of Holy Trinity and St Oswald and The Hayfield School. Well-known places in the area include Hospital of St Mary Magdalene (4.9 miles south). Not far away are Potteric Carr Nature Reserve.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
How we price bath re-enamelling
Prices start from £350. We don’t charge extra for travel to Blaxton. The price comes down to:
- The material
- How much damage there is
- What kind of damage it is
- Access to the area
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
You can take the pictures on your phone. Ensure they show:
- Something in shot to show the size
- The postcode, so we can plan the visit
- A picture taken from further back
- Any details about the material
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Also near Blaxton
More services for Blaxton
Landlord and trade work in Blaxton
Housing associations and facilities teams use us for planned and reactive repairs in North Lincolnshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
About our accreditations · Every repair comes with a one-year guarantee.
