Nottinghamshire · England

Bath re-enamelling & resurfacing in Everton, Nottinghamshire

Full bath re-enamelling and resurfacing for homes and businesses in Everton and across Nottinghamshire. Send pictures for a free, fixed quote.

  • Resurfacing from £350
  • A roll-top that is seen better days
  • A bath that stays dull however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Everton homes

Bath re-enamelling in Everton without replacing anything

The bath stays where it is, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. We work on basins & shower trays, acrylic baths and cast iron baths, and common reasons people get in touch are several chips and rust patches and a dull, rough surface that won’t come clean.

Your repair is guaranteed for a year, as with every job we do.

Location
Everton (DN10)
Area hub
Nottinghamshire
Warranty
A year, on every repair
Quote
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026
Before and after: an old basin refinished to bright white

Landlord and trade work in Everton

Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Covering Everton

Everton is about 6 miles north of Retford, in Nottinghamshire. We visit clients in Everton and nearby villages, so you do not need to take anything anywhere. Everton is one of 329 places in Nottinghamshire where we work. Our jobs stretch from Everton to Leeds (about 36 miles away).

Our visits in DN10 are booked in the same way as anywhere else. That includes homes on High Street, Chapel Lane and Bawtry Road and the roads around them. Other places close to Everton include Mattersey Thorpe (1 mile south-west), Drakeholes (1 mile south-east), Newington (2 miles north-west), Misson (2 miles north) and Finningley (5 miles north). Larger places within reach include Worksop (9 miles south-west), Retford (6 miles south), New Ollerton (14 miles south), Kilton (9 miles south-west), Creswell (15 miles south-west) and Bracebridge (10 miles south-west).

What’s near Everton

We visit homes around Mattersey Hall, Holy Trinity Church and Everton Primary School, among other places. Further afield, we also cover the area around Hospital of St Mary Magdalene (2.8 miles north-west). Green spaces nearby include Bellmoor Lake.

Map of Everton © OpenStreetMap contributors

Honest limits

Not everything can be repaired, and we’ll tell you before we start. We cannot fix:

  • Leaking taps or wastes (a plumber’s job)
  • Acrylic that moves when you stand in it
  • Damage hidden under a previous coating, until it’s stripped back

If in doubt, send photos and we’ll say what we think before you book.

Materials we work on in Everton

  • Cast iron baths
  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops

Signs you need bath re-enamelling in Everton

By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.

Contact us if you’ve noticed:

  • Thin, worn enamel in places
  • Enamel that’s lost its shine and feels rough
  • Stains that will not shift
  • An old resurfacing that is failing

What your quote should include

  • How the room is protected while they work
  • Whether cleaning and preparation are in the price
  • Whether they match the colour on site
  • What happens if the damage is worse than the photos show

10 questions to ask before you book

FAQs for Everton

Can a failed resurfacing be redone?

Usually, yes. The old coating comes off before we resurface it. Mention it when you send pictures.

Will the price change on the day?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Does the bath have to be removed?

No, it stays where it is. We work on the bath in place, with the room masked and ventilated.

Is a repair better than a new one?

Normally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as householders.

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

It’s been repaired before. Can you still fix it?

Generally, yes. Let us know what was used before.

Can you change the colour of my bath?

Yes, most people go for white. Mention the colour you want when you send photos.

Repair or replace in Everton?

Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the entire surface with the bath left where it is. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

Why Everton customers choose us

  • Normally one visit, start to finish
  • Honest advice, even when it means no job
  • Colour-matched on site
  • A fixed quote before booking

Take a look at our full price list or resurfacing vs replacement cost guide.

Materials and what they mean for the repair

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

What we do, step by step

Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which usually takes most of the day. If we find something your pictures didn’t show, we will explain it before carrying on.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Before we arrive

  • Plan for the room to be out of bounds to pets and children
  • Let the surface dry out before the visit
  • Move bottles, mats and clutter away from the area

Ask for a price

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Get a free quote

Related advice

DIY repairs versus a professional job

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Looking after it afterwards

Nothing complicated is needed, just a few sensible habits:

  • Avoid suction-cup mats
  • Don’t let dyes or oils sit on the finish
  • Do not leave bottles, razors or sponges standing on the surface
  • A quick wipe after use keeps limescale away

A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.

Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.