Nottinghamshire · England
Bath Re-enamelling in Misson
Problem with your bath in Misson? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- A bath in a colour that no longer suits
Landlords, agents and businesses in Misson
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
About our bath re-enamelling in Misson
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. Whether it’s lots of chips and rust spots and a peeling or bubbling previous coating, we can help, on basins & shower trays, Victorian roll-tops and pressed steel baths alike.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Location
- Misson (DN10)
- County
- Nottinghamshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
Once the work has cured, treat it gently:
- Use washing-up liquid and a soft cloth
- Never use suction bath mats
- Keep toiletries on a shelf rather than in the bath
- Repair dripping taps early
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Towns and villages near Misson
What else we do in Misson
What affects the price in Misson
Resurfacing from £350. Every quote is fixed and free. What we look at:
- The material and finish
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
Photographing the damage takes a minute. Please include:
- A wider photo showing the whole bath
- What it’s made of, if you know
- Natural light rather than flash
- A close-up of the damage, in focus
Most customers in Misson get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why Misson clients choose us
- Straight answers about what a repair can do
- Everything repaired in place
- Free fixed quotes from pictures
- Same prices wherever you are
Take a look at our prices page and guide to resurfacing and replacement costs.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Misson and the surrounding area
Misson is about 8 miles south-east of Doncaster, in Nottinghamshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 329 towns and villages in Nottinghamshire. We work right across the region, from Misson to Leeds (35 miles away).
Jobs in DN10 are booked in the same way as anywhere else. Jobs here include addresses on High Street, Station Road and Middle Street. Nearby, we also work in Newington (2 miles south-west), Everton (2 miles south), Finningley (3 miles north), Drakeholes (3 miles south) and Mattersey Thorpe (3 miles south). Further out, we also cover Worksop (11 miles south-west), Retford (9 miles south), Kilton (11 miles south-west), Bracebridge (12 miles south-west), Bawtry (3 miles south-west) and Carlton in Lindrick (9 miles south-west).
Around Misson
Our customers here include homes close to Misson Primary School and Church of St John The Baptist And Boundary Wall. Other landmarks nearby include Hospital of St Mary Magdalene (2.8 miles south-west).
Do you need bath re-enamelling in Misson?
Frequently the bath has just had decades of use. The body of the bath is usually perfectly sound.
Most people get in touch when they notice something like this:
- A dull, rough surface that won’t come clean
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- Brown or grey marks that do not clean off
Questions to ask before booking
- A fixed price, and whether VAT is included
- Whether the price covers travel
- What protection goes down before work starts
- How long the guarantee is and what it covers
Common questions in Misson
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Do you come to Misson?
Yes, we do. We send a technician to Misson for every job, and the price is the same as everywhere else.
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Is the work guaranteed?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes the best part of a day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
- Keep pets and children out of the room while we work
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
