Oxfordshire · England
Bath re-enamelling & resurfacing in Bledington, Oxfordshire
Fixed-price bath re-enamelling in Bledington and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
Bledington questions
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
Which areas do you work in?
Across the UK, so Bledington is covered. Prices don’t change with location.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
About our bath re-enamelling in Bledington
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on acrylic baths, cast iron baths and basins & shower trays, and common reasons people contact us are a coating lifting around the plughole and staining under the taps and around the waste.
All our work is covered by a one-year guarantee, wherever you are in Oxfordshire.
- Location
- Bledington (OX7)
- Region
- Oxfordshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How to care for the repair
Looking after the surface is easy, and it makes a real difference:
- Wash away dyes and oils after use
- Stick to gentle, non-abrasive cleaners
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
For anyone letting property in or around Bledington, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
Covering Bledington
Bledington is about 10 miles north of Carterton, in Oxfordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Bledington is one of 443 towns and villages in Oxfordshire where we work. We work right across the region, from Bledington to Birmingham (41 miles away).
Jobs in OX7 are booked in the same way as anywhere else. Streets in the area include Main Street, Station Road and Old Forge Close, all of which we cover. If you are just outside Bledington, we cover Kingham (1 mile north-east), Lower Oddington (2 miles north-west), Upper Oddington (2 miles north-west), Adlestrop (3 miles north) and Evenlode (4 miles north). We also work in nearby towns such as Witney (10 miles south-east), Carterton (10 miles south), Chipping Norton (5 miles north-east), Woodstock (13 miles east), Cogges (11 miles south-east) and Bloxham (14 miles north-east).
What’s near Bledington
Around Bledington, we work in homes near Bledington Primary School and Church of St Leonard. The closest station to Bledington is Kingham station, roughly 0.6 miles east. Well-known places in the area include Moore Cottage Hospital (4.9 miles west) and Park House Toy Collectors Museum (3.7 miles north-west).
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Colour mixed on the day to match
- A year’s guarantee on all work
- Repair technicians who travel to you, UK-wide
- A fixed quote before booking
Take a look at our full price list and bath cost comparison.
What bath re-enamelling costs
Prices start from £350. We price every job individually, from your pictures. What matters most is:
- How hard the colour is to match
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- The material
The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
Send pictures for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Do you need bath re-enamelling in Bledington?
Frequently the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is generally as strong as ever.
Keep an eye out for any of the following:
- An original cast iron bath that needs restoring
- An old resurfacing that’s failing
- Enamel that’s lost its shine and feels rough
- Wear marks under the taps
Comparing quotes
- Whether a trained technician does the job
- What protection goes down before work starts
- What happens if the damage is worse than the pictures show
- How long it needs to cure
Places near Bledington
What else we do in Bledington
What we can’t put right
We won’t take on work that will not last, so here’s what a repair cannot put right:
- Acrylic that moves when you stand in it
- Holes rusted through the metal
- A cast iron or steel bath that is cracked right through
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Bledington
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
How the visit works
We agree an arrival time beforehand. On site, it takes the best part of a day. The room is left tidy and ready to use once it has cured.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Clear toiletries, mats and anything else from around the area
- Tell us about parking, stairs or access
Get a quote
The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Advice
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
About our accreditations · Every repair comes with a one-year guarantee.
