Gloucestershire · England
Bath Re-enamelling in Evenlode
Damaged bath in Evenlode? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- A peeling or bubbling previous coating
Landlords, agents and businesses in Evenlode
For anyone letting property in or around Evenlode, we will quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
About our bath re-enamelling in Evenlode
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s an original cast iron bath that needs restoring and a bath in a colour that no longer suits, we can normally put it right, on basins & shower trays, cast iron baths and Victorian roll-tops alike.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Evenlode (GL56)
- County
- Gloucestershire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
How the surface is treated afterwards matters:
- Never use suction bath mats
- Keep toiletries on a shelf rather than in the bath
- Respect the curing time we give you
- A dripping tap should be fixed promptly
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
FAQs for Evenlode
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Do you come to Evenlode?
We do. We send a technician to Evenlode for every job, with no extra charge for travel.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Is a repair better than a new one?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you will get one combined price.
What a repair can’t fix
A repair isn’t always the answer, and we’ll tell you before we start. We cannot fix:
- Acrylic that moves when you stand in it
- Plumbing leaks, which need a plumber
- A bath split right through the body
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
How it works
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Mention if the room is upstairs or in a flat
- Avoid using the area for a few hours before we arrive
- Make sure the room can be ventilated
Getting a price
If you’re in Evenlode and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Read more
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
About Evenlode
Evenlode is about 14 miles north of Carterton, in Gloucestershire. Anywhere in GL56, we come to you. Evenlode is one of 470 places in Gloucestershire we cover. Our nearest city page is Birmingham, about 37 miles away.
Here we cover the GL56 postcode area. Neighbouring places we cover include Chastleton (1 mile east), Adlestrop (2 miles south-east), Lower Oddington (2 miles south), Upper Oddington (2 miles south) and Little Compton (2 miles east). We also work in nearby towns such as Winchcombe (13 miles west), Bourton-on-the-Water (6 miles south-west), Chipping Campden (8 miles north-west), Stow-on-the-Wold (3 miles south-west), Upper Rissington (6 miles south) and Northleach (11 miles south-west).
What’s near Evenlode
Locally, our jobs take us to homes close to Church of St Edward, among other places. For rail, the closest station is Moreton-In-Marsh station, roughly 2.7 miles north-west. A little further out are Wheelbarrow Castle (2.9 miles north-east) and Moore Cottage Hospital (6 miles south-west).
Prices and what affects them
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Any earlier repairs that need removing first
- How many areas need work
- The material
- Access to the area
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Your postcode, so we can check dates
- One picture of the whole bath
- The material, if you know it
- Good light, ideally daylight, without flash glare
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Nearby places to Evenlode
Also in Evenlode
Why repair rather than replace?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. You will see the full price before you book, with no extras added later.
Why choose Surface Doctor in Evenlode
- Colours mixed by hand to suit your surface
- Technicians who travel to you, UK-wide
- A year’s guarantee on all work
- Same prices wherever you are
See our pricing or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
