Hampshire · England
Bath re-enamelling & resurfacing in Blendworth, Hampshire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Blendworth. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Several chips and rust patches
- Brown or grey marks that don’t clean off
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Bath re-enamelling at your home in Blendworth
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. Our technicians work on acrylic baths, cast iron baths and basins & shower trays, and common reasons people contact us are staining under the taps and around the waste and worn patches where water runs and sits.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Where
- Blendworth (PO8)
- County
- Hampshire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- Every repair guaranteed for a year
- Colours mixed by hand to suit your surface
- Free fixed quotes from pictures
- Most jobs done in one visit
See our full price list and resurfacing vs replacement cost guide.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Get any chip repaired quickly
- Leave the bath for the full curing time before using it
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs right away
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Signs you need bath re-enamelling in Blendworth
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
You may need us if you’ve spotted any of these:
- A coloured bath you want in white
- Thin, worn enamel in places
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
What to look for in a quote
- How soon you can use it again
- Whether cleaning and preparation are in the price
- How the colour is matched
- Who turns up on the day
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that’s cracked right through
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Also near Blendworth
More services for Blendworth
Blendworth and nearby
Blendworth is about 1 mile north-east of Horndean, in Hampshire. Jobs in Blendworth are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Blendworth is one of 683 towns and villages in Hampshire we cover. Our jobs stretch from Blendworth to London (about 56 miles away).
Our technicians cover all of the PO8 postcode area and the streets around it. Neighbouring places we cover include Chalton (2 miles north-east), Forestside (3 miles east), West Marden (4 miles east), Buriton (4 miles north) and Weston (5 miles north). We also work in nearby towns such as Gosport (11 miles south-west), Havant (4 miles south), Fareham (10 miles south-west), Hedge End (14 miles west), Waterlooville (3 miles south-west) and Petersfield (6 miles north).
Landmarks near Blendworth
Locally, our jobs take us to homes close to Horndean Church of England Junior School, Horndean Technology College and The Ship & Bell pub, among other places. The closest station to Blendworth is Rowlands Castle station, about 2.1 miles south-east. A little further out are Havant War Memorial Hospital (4.3 miles south) and Clanfield Earthwork (2.1 miles north). Not far away are Windmill Hill.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes the best part of a day. We tidy up before we leave and let you know when you can use it again.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
- Clear the area around the damage
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Read more
FAQs for Blendworth
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Which areas do you work in?
Everywhere in the UK, Blendworth included. There’s no extra charge for travel.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Is a repair better than a new one?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item with your PO8 postcode.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
About our accreditations · Every repair comes with a one-year guarantee.
