Hampshire · England
Bath re-enamelling & resurfacing in Chalton, Hampshire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Chalton. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A coloured bath you want in white
- Several chips and rust patches
Bath re-enamelling at your home in Chalton
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. If you are dealing with a coloured bath you want in white and staining under the taps and around the waste, we can help, whatever the material.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Chalton (PO8)
- County
- Hampshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
About Chalton
Chalton is about 3 miles north-east of Horndean, in Hampshire. Jobs in Chalton are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Chalton is one of 683 towns and villages in Hampshire where we work. We work right across the region, from Chalton to London (54 miles away).
We cover every part of the PO8 postcode area. We also cover the places around Chalton: Blendworth (2 miles south-west), Buriton (3 miles north), Forestside (3 miles south-east), West Marden (3 miles south-east) and Weston (4 miles north). Further out, we also cover Gosport (12 miles south-west), Havant (5 miles south), Fareham (12 miles south-west), Horndean (3 miles south-west), Alton (15 miles north) and Hedge End (15 miles west).
Around Chalton
We visit homes around Ditcham Park and Church of St Michael. For rail, the closest station is Rowlands Castle station, roughly 3.1 miles south. A little further out are Clanfield Earthwork (1.2 miles north-west) and Petersfield Community Hospital (4.7 miles north). Not far away are Windmill Hill.
For landlords and businesses
If you manage property in Chalton, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Don’t leave bottles, razors or sponges standing on the surface
- Do not use the bath until it has fully cured
- Get any chip repaired quickly
- Stick to gentle, non-abrasive cleaners
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Common questions in Chalton
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we will plan for it.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Hampshire.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room protected and ventilated.
How much does bath re-enamelling cost in Chalton?
Prices start from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
What areas do you cover?
We cover the entire UK, including Chalton and the rest of Hampshire. Send your postcode with your pictures and we will offer you dates.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
How long will the bath be out of use?
Normally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
What we cannot put right
A few problems are outside what a surface repair can do:
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Places near Chalton
More services for Chalton
How the visit works
The work is clean and fairly quiet. We protect the area first, then the work takes most of the day. Before we leave, we explain the curing time and the aftercare.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
- Plan for the room to be out of bounds to pets and children
Getting a price
Send us a picture of the damage and a wider shot of the entire item, with your PO8 postcode, and we will come back with a fixed quote.
Related advice
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Why repair rather than replace?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. Otherwise, resurfacing typically wins. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.
Why book with us
- A fixed quote before you book
- We will tell you if it’s not worth repairing
- We leave the room as we found it
- No extra charge for your area
Read our full price list and bath cost comparison.
What bath re-enamelling costs
Resurfacing from £350. There is no charge for travel to Chalton. The price comes down to:
- How many areas need work
- How many items we do on one visit
- Previous DIY repairs that have to come out
- How easy the damage is to reach
A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
How to get a fixed price
You can typically get a fixed quote without us visiting. To help us price it:
- One sharp close-up of the damage
- Details of any past repairs
- The postcode, so we can plan the visit
- A photo taken from further back
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
About our accreditations · Every repair comes with a one-year guarantee.
