Darlington · England

Bath re-enamelling & resurfacing in Bolam, Darlington

Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Bolam. Send pictures for a free, fixed quote.

  • Resurfacing from £350
  • A bath in a colour that no longer suits
  • A roll-top that is seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Bolam

Bath re-enamelling at your home in Bolam

Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We regularly repair acrylic baths, pressed steel baths and Victorian roll-tops, and common reasons people get in touch are a peeling or bubbling previous coating and several chips and rust patches.

You get a one-year guarantee, the same in Bolam as everywhere else we work.

Area
Bolam (DL2)
Area hub
Darlington
Guarantee
12 months on all our work
Quote
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

Common problems we fix in Bolam

The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.

Typical reasons for a call-out include:

  • A bath that stays dull however much you clean it
  • An outdated colour you’d like to change
  • Lots of chips and rust spots
  • Thin, worn enamel in places

Comparing quotes

  • When it can be used again
  • A fixed price, and whether VAT is included
  • Aftercare advice
  • What happens if they find more damage

Our hiring checklist

Honest limits

A repair is not always the answer, and we’d rather say so up front. We cannot fix:

  • Holes rusted through the metal
  • An acrylic bath that flexes badly underfoot
  • Problems we cannot see until an old finish comes off

Send us pictures and we will tell you honestly before you book.

What we work on

  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths
  • Basins & shower trays
  • Victorian roll-tops

Bolam and the surrounding area

Bolam is about 4 miles south of Bishop Auckland, in Darlington. Jobs in Bolam are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Bolam is one of 53 places in Darlington where we work. Our jobs stretch from Bolam to Newcastle upon Tyne (27 miles away).

Our technicians cover all of DL2 and the streets around it. If you’re just outside Bolam, we cover Houghton-le-Side (2 miles east), Summerhouse (2 miles south), Denton (3 miles south-east), Walworth Gate (3 miles south-east) and Heighington (3 miles east). Further out, we also cover Darlington (7 miles south-east), Harrowgate Hill (7 miles south-east), West Park (6 miles south-east), Eastbourne (8 miles south-east), Cockerton (7 miles south-east) and Rise Carr (7 miles south-east).

Local landmarks in Bolam

Locally, our jobs take us to homes close to St Andrew's Church and the streets around them. The nearest railway station is Shildon station, roughly 3.1 miles north-east. A little further out are Bishop Auckland Hospital (4.1 miles north) and Walworth Castle (3.3 miles south-east).

Map of Bolam © OpenStreetMap contributors

What your bath is made of matters

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.

Looking after it afterwards

Aftercare is simple, and it makes a real difference:

  • A dripping tap should be fixed promptly
  • Keep suction mats out of the bath
  • Don’t let dyes or oils sit on the finish
  • A quick wipe after use keeps limescale away

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.

FAQs for Bolam

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Do you cover the entire of Darlington?

We cover the whole UK, including Bolam and the rest of Darlington. Send your postcode with your photos and we’ll offer you dates.

How much does bath re-enamelling cost in Bolam?

Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up and a photo of the entire item with your DL2 postcode.

Do you come to Bolam?

Yes. We cover the entire UK and travel to Bolam and the rest of Darlington. Send us photos for a fixed quote, or call 0345 017 0787.

Can landlords book you?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

What happens next?

We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit. The rest of the house is unaffected.

Can you fix a peeling bath coating?

Yes. Stripping the old coating adds time, so it’s reflected in the quote.

What we do, step by step

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the day after.

Before we arrive

  • Have a window or extractor fan available
  • Let us know about parking or access
  • Have somewhere for us to park nearby if possible

Getting a price

A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.

Get a fixed quote

Related advice

Why repair rather than replace?

Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the whole surface with the bath left where it is. Prices start from £350. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why us?

  • Same prices wherever you are
  • CHAS and Constructionline accredited
  • A year’s guarantee on all work
  • Straight answers about what a repair can do

Read our prices page and guide to resurfacing and replacement costs.

Landlords, agents and businesses in Bolam

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Should I try a DIY kit first?

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.