North Lincolnshire · England
Bath Re-enamelling in Bonby
Bath re-enamelling across Bonby and nearby, done in a single visit in most cases.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
How we handle bath re-enamelling in Bonby
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we don’t cut corners on it. We work on acrylic baths, cast iron baths and pressed steel baths, and people most often call us about a coating lifting around the plughole and several chips and rust patches.
All our work comes with our one-year guarantee, wherever you are in North Lincolnshire.
- Where
- Bonby (DN20)
- Area hub
- North Lincolnshire
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Wash away dyes and oils after use
- Never use suction bath mats
- Stick to gentle, non-abrasive cleaners
- Repair dripping taps early
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Landlords, agents and businesses in Bonby
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
How the visit works
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes the best part of a day for most jobs. We leave the room clean.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Make sure the room can be ventilated
Getting a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
What we are called out for in Bonby
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, usually first under the taps and around the waste.
Get in touch if you’ve noticed any of these:
- Chips and rust in more than one place
- A dull, rough surface that won’t come clean
- A period or roll-top bath worth keeping
- Brown or grey marks that don’t clean off
What to look for in a quote
- Whether they match the colour on site
- When it can be used again
- How long the guarantee is and what it covers
- A fixed quote, and whether VAT is included
Your questions about bath re-enamelling in Bonby
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
How long will the bath be out of use?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
How much does bath re-enamelling cost in Bonby?
Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Can a failed resurfacing be redone?
Typically, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
What we can’t put right
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Why repair rather than replace?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the entire surface without moving it. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why Bonby customers choose us
- Fixed prices from your pictures
- One price list for the whole UK
- One visit for most repairs
- Colours mixed by hand to suit your surface
Read our prices page and resurfacing vs replacement cost guide.
What bath re-enamelling costs
Resurfacing from £350. We price every job individually, from your pictures. The main factors are:
- Unusual colours or finishes
- The material and finish
- Doing more than one item at once
- How much damage there is
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
When you take your photos, a few simple things make all the difference:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- Natural light rather than flash
If you’re in Bonby and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Towns and villages near Bonby
What else we do in Bonby
Our work in Bonby
Bonby is about 8 miles north-east of Scunthorpe, in North Lincolnshire. Our technicians come to customers in Bonby, so you do not need to take anything anywhere. Our repair technicians cover 90 places across North Lincolnshire, from the larger towns to small villages. Our nearest city page is Leeds, about 45 miles away.
Our visits in DN20 work the same way as everywhere else we cover. Local streets include Main Street, Sheepdyke Lane and Hall Meadow. Main roads around Bonby include the B1204, which makes travel easy. Other places close to Bonby include Saxby All Saints (1 mile north-west), Worlaby (1 mile south-east), Horkstow (2 miles north-west), Elsham (3 miles south-east) and Appleby (3 miles west). Larger places within reach include Scunthorpe (8 miles south-west), Barton-upon-Humber (4 miles north-east), Bottesford (9 miles south-west), Brigg (5 miles south), Frodingham (7 miles west) and Crosby (7 miles west).
Local landmarks in Bonby
Around Bonby, we work in homes near Church of Saint Andrew and The Haymaker pub, among other places. The nearest railway station is Barton-On-Humber station, about 4.6 miles north. Well-known places in the area include Glanford (1.9 miles south) and Barton upon Humber Castle (4.3 miles north-east). Green spaces nearby include Far Ings National Nature Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
