Midlothian · Scotland
Bath Re-enamelling for Bonnyrigg homes
Full bath re-enamelling and resurfacing for homes and businesses in Bonnyrigg and across Midlothian. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Lots of chips and rust spots
- Wear marks under the taps

Bath re-enamelling at your home in Bonnyrigg
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Our repair technicians work on cast iron baths, basins & shower trays and pressed steel baths, and common reasons people get in touch are a coating lifting around the plughole and a roll-top that’s seen better days.
Big or small, you get the same one-year guarantee in Bonnyrigg and across Midlothian.
- Area
- Bonnyrigg (EH19, EH18, EH20)
- Area hub
- Midlothian
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026

Why repair rather than replace?
A replacement frequently means several trades over several days. Resurfacing takes one technician and typically a day. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- One-year guarantee on every repair
- One price list for the entire UK
- One visit for most repairs
Read our full price list or resurfacing vs replacement cost guide.
When a repair is not the answer
Not everything can be repaired, and we’d rather say so up front. We can’t fix:
- Holes rusted through the metal
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- How much damage there is
- How many items we do on one visit
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- A wider photo showing the entire bath
- Your postcode, so we can check dates
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Looking after it afterwards
To keep it looking its best for years:
- Leave the bath for the full curing time before using it
- Rinse off hair dye, oils and bath bombs immediately
- Repair dripping taps early
- Clean with a soft cloth and mild detergent
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Bonnyrigg and nearby
Bonnyrigg is about 6 miles south-east of Edinburgh, in Midlothian. We visit homes and businesses in Bonnyrigg, so you do not need to take anything anywhere. Bonnyrigg is one of 33 places in Midlothian we cover. You can also see our page for Edinburgh, about 6 miles away.
Postcode districts we cover here: EH19, EH18 and EH20. We regularly work on streets such as Old Market Place, High Street and Church Road. Being close to the A768 and B704, Bonnyrigg is simple for us to get to. Other places close to Bonnyrigg include Lasswade (1 mile north-west), Polton (1 mile west), Rosewell (2 miles south-west), Loanhead (2 miles west) and Roslin (3 miles west). Within a short drive, we also cover Penicuik (5 miles south-west), Gorebridge (3 miles south-east), Mayfield (3 miles east), Shawfair (4 miles north), Danderhall (3 miles north) and Bilston (3 miles west). As one of the bigger places in Midlothian, Bonnyrigg is somewhere we visit often.
Local landmarks in Bonnyrigg
Typical jobs here are in homes near Bonnyrigg Parish Church, Lasswade High School Centre and Public Library, among other places. Bonnyrigg’s nearest station is Eskbank station, about 1.1 miles north-east of the centre. Nearby you’ll also find Dalhousie Castle (1.2 miles south-east) and Midlothian Community Hospital (0.8 miles north-east). Not far away are The New Leaf Co-op and Edgelaw Reservoir.
What we do, step by step
You do not need to empty the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. It generally takes the best part of a day, and you are welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Make sure the room can be ventilated
- Let us know if it has been repaired before
- Clear toiletries, mats and anything else from around the area
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Related advice
What we are called out for in Bonnyrigg
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Signs it’s time to call us include:
- Worn patches where water runs and sits
- A dull, rough surface that will not come clean
- A peeling or bubbling previous coating
- Lots of chips and rust spots
What to look for in a quote
- What preparation is included
- A fixed price, and whether VAT is included
- What the guarantee covers, and for how long
- What happens if the damage is worse than the photos show
Other services in Bonnyrigg
Bonnyrigg: your questions answered
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.
Is there a guarantee?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Can a failed resurfacing be redone?
Generally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Will the new finish last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Midlothian.
About our accreditations · Every repair comes with a one-year guarantee.

