Gloucestershire · England
Bath re-enamelling & resurfacing in Bourton-on-the-Hill, Gloucestershire
Full bath re-enamelling and resurfacing in Bourton-on-the-Hill, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
Bath re-enamelling in Bourton-on-the-Hill, done in place
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We regularly repair acrylic baths, Victorian roll-tops and cast iron baths, and common reasons people get in touch are a dull, rough surface that won’t come clean and lots of chips and rust spots.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Bourton-on-the-Hill (GL56)
- Region
- Gloucestershire
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we can’t put right
A repair is not always the answer, and we will tell you before we start. We can’t fix:
- Acrylic that moves when you stand in it
- Problems we can’t see until an old finish comes off
- A bath split right through the body
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Bourton-on-the-Hill
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Bourton-on-the-Hill questions
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Is there any odour?
Expect a mild smell while we’re working, which fades afterwards.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
How long does re-enamelling take?
One day for most baths, ready the following day. We’ll confirm timings when we quote.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Can you fix a peeling bath coating?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Aftercare tips
Looking after the surface is easy:
- Have chips seen to early
- Wipe the bath dry after use in hard water areas
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
About Bourton-on-the-Hill
Bourton-on-the-Hill is about 11 miles south-east of Evesham, in Gloucestershire. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. We work in 470 places in Gloucestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 34 miles away.
Our visits in GL56 are booked in the same way as anywhere else. Jobs here include addresses on Fenhill Close and Chantry Gardens and the roads around them. We also cover the places around Bourton-on-the-Hill: Longborough (2 miles south), Ganborough (2 miles south), Broadwell (3 miles south-east), Stow-on-the-Wold (4 miles south) and Lower Swell (4 miles south). We also work in nearby towns such as Bishop's Cleeve (14 miles west), Fairview (15 miles south-west), Pittville (15 miles west), Whaddon (15 miles south-west), Winchcombe (10 miles west) and Bourton-on-the-Water (7 miles south).
What’s near Bourton-on-the-Hill
Our clients here include homes close to The Horse And Groom pub and Church of St Lawrence. The closest station to Bourton-on-the-Hill is Moreton-In-Marsh station, roughly 1.7 miles east. Further afield, we also cover the area around Wellington Aviation Museum (1.4 miles east). The countryside around Bourton-on-the-Hill includes Seven Wells Hill.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
What affects the price in Bourton-on-the-Hill
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- The size and number of damaged areas
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- The colour and finish to match
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
Phone photos are fine, there’s no need for anything special. Ensure they show:
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- One picture of the entire bath
- The material, if you know it
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and you are under no obligation.
What we do, step by step
Arrival times are agreed in advance, so you’re not left guessing. Once we are there, the work takes the best part of a day. We leave the room clean.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Let the surface dry out before the visit
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Read more
Landlord and trade work in Bourton-on-the-Hill
Landlords, letting agents and housing providers in Bourton-on-the-Hill use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Repair or replace in Bourton-on-the-Hill?
Replacing a bath typically involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why book with us
- A fixed quote before you book
- No extra charge for your area
- Colour mixed on the day to match
- Everything repaired in place
Take a look at our pricing or resurfacing vs replacement cost guide.
Nearby places to Bourton-on-the-Hill
Other services in Bourton-on-the-Hill
About our accreditations · Every repair comes with a one-year guarantee.
