Cornwall · England
Bath re-enamelling & resurfacing in Boyton, Cornwall
Problem with your bath in Boyton? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Stains that will not shift
- Wear marks under the taps
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- How much damage there is
- Previous DIY repairs that have to come out
- Access to the area
- The type of damage
We charge the same wherever you are, so there’s no premium for Boyton. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed quote
Two or three clear photos are generally enough. It helps if you send:
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- Natural light rather than flash
- A coin or ruler next to the damage for scale
Send us pictures of the damage and a wider shot of the whole item, with your PL15 postcode, and we’ll reply with a fixed quote.
Bath re-enamelling in Boyton, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We work on basins & shower trays, pressed steel baths and acrylic baths, and people most frequently call us about wear marks under the taps and a period or roll-top bath worth keeping.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Where
- Boyton (PL15)
- County
- Cornwall
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes most of the day. If anything looks different from your pictures, we will talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
- Avoid using the area for a few hours before we arrive
How to get a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Keeping it looking good
After the repair has cured, a few habits help it last:
- Do not use the bath until it has fully cured
- A quick wipe after use keeps limescale away
- Get any chip repaired quickly
- Clean with a soft cloth and mild detergent
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Covering Boyton
Boyton is about 15 miles north-west of Tavistock, in Cornwall. We visit homes and businesses in Boyton and the surrounding area, so you don’t need to take anything anywhere. Boyton is one of 644 places in Cornwall we cover.
We work across the PL15 postcode area. We also travel to Ladycross (2 miles south), Werrington (3 miles south), St Giles on the Heath (3 miles east), Yeolmbridge (3 miles south) and North Petherwin (3 miles south-west). Larger places within reach include Launceston (5 miles south), Bude (11 miles north-west), Callington (14 miles south), Newport (4 miles south), Flexbury (11 miles north-west) and Camelford (14 miles south-west).
What’s near Boyton
In Boyton, that means homes near Church of the Holy Name and Boyton Community Primary School. A little further out are Launceston Castle (4.7 miles south).
What we’re called out for in Boyton
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Get in touch if you’ve noticed:
- Wear marks under the taps
- A coloured bath you want in white
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
What your quote should include
- How long the guarantee is and what it covers
- How long it needs to cure
- Who will actually do the work
- What protection goes down before work starts
Landlord and trade work in Boyton
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Nearby places to Boyton
Also in Boyton
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Boyton customers choose us
- One-year guarantee on every repair
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
- Most jobs done in one visit
Take a look at our prices page and bath cost comparison.
Your questions about bath re-enamelling in Boyton
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Can I get a quote without a visit?
Normally, yes. Clear photos let us give you a fixed price without visiting.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
About our accreditations · Every repair comes with a one-year guarantee.
