Cornwall · England
Bath Re-enamelling in Camelford
Fixed-price bath re-enamelling in Camelford and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
Camelford questions
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Just add the extra items to your photos and we’ll quote them together.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Is the work guaranteed?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
How we handle bath re-enamelling in Camelford
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s stains that won’t shift and enamel that’s lost its shine and feels rough, we can normally put it right.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Where
- Camelford (PL32)
- Region
- Cornwall
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Never use suction bath mats
- Store bottles off the bath
- Repair dripping taps early
- Respect the curing time we give you
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Towns and villages near Camelford
More services for Camelford
Where we work around Camelford
Camelford is about 11 miles north of Bodmin, in Cornwall. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. We cover all 644 towns and villages in Cornwall, from the larger towns to small villages.
All of PL32 is covered, from the main roads to the quietest streets. You will find streets such as Market Place, High Street and Mount Camel, and we cover them all. Main roads around Camelford include the A39 and B3266, which makes travel easy. Other places close to Camelford include Trevia (1 mile west), Tregoodwell (1 mile east), Valley Truckle (1 mile south), Helstone (2 miles south-west) and Delabole (2 miles west). Larger places within reach include Bodmin (11 miles south), Liskeard (15 miles south-east), Launceston (14 miles east), Addington (15 miles south-east), Wadebridge (10 miles south-west) and Padstow (13 miles south-west).
Landmarks near Camelford
Our clients here include homes close to St Thomas of Canterbury's Church, The Masons Arms and Camelford Community Primary School and the streets around them. A little further out are Bottereaux Castle (4.5 miles north). Open spaces near Camelford include Condolden.
What we cannot put right
A repair is not right for every job, including:
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Camelford
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
What we do, step by step
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take the best part of a day, and you can get on with other things while we’re there.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
- Move bottles, mats and clutter away from the area
Get a quote
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- Typically one visit, start to finish
- One-year guarantee on every repair
- Fixed prices from your pictures
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page or bath cost comparison.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before booking. We look at:
- Where the damage is and how we get to it
- Unusual colours or finishes
- What the surface is made of
- Doing more than one item at once
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
Before you send pictures, a few simple things make all the difference:
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- One sharp close-up of the damage
- Any details about the material
Email us a picture of the damage and a wider shot of the whole item, and tell us you’re in Camelford, and we will reply with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
