Kirklees · England
Bath re-enamelling & resurfacing in Bracken Hill, Kirklees
Bath re-enamelling for Bracken Hill, without a refit. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
Bath re-enamelling at your home in Bracken Hill
The bath stays where it is, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. We regularly repair pressed steel baths, cast iron baths and acrylic baths, and the jobs we see most are an old resurfacing that’s failing and a dull, rough surface that won’t come clean.
Big or small, you get the same one-year guarantee in Bracken Hill and across Kirklees.
- Location
- Bracken Hill (WF14, HD5, WF15)
- Area hub
- Kirklees
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When we would advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- Acrylic that moves when you stand in it
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
Send us photos and we’ll tell you honestly.
What we work on
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Also near Bracken Hill
More services for Bracken Hill
Why repair rather than replace?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and normally one day, with the bath ready the following day. Prices start from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
What you get with us
- One visit for most repairs
- Free fixed quotes from pictures
- We leave the room as we found it
- CHAS and Constructionline accredited
See our full price list and guide to resurfacing and replacement costs.
What we’re called out for in Bracken Hill
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
These are the problems we are asked about most:
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
- Several chips and rust patches
What your quote should include
- What protection goes down before work starts
- How changes to the job are handled
- A fixed quote, and whether VAT is included
- Whether a trained technician does the job
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- The material and finish
- The type of damage
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
How to get a fixed quote
Most quotes are done from pictures alone. To make it quick:
- A wider photo showing the entire bath
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
What we do, step by step
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes a full day in most cases. The room is left tidy and ready to use once it has cured.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let us know about parking or access
- Let us know if it has been repaired before
- Ensure the area is dry
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
Questions from Bracken Hill
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
How long will the bath be out of use?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders in Bracken Hill.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first.
Covering Bracken Hill
Bracken Hill is about 1 mile west of Mirfield, in Kirklees. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Bracken Hill is one of 189 places in Kirklees we cover. You can also see our page for Leeds, about 11 miles away.
Our repair technicians cover all of WF14, HD5 and WF15. From Leeds Road, Woodsome Avenue and Coppin Hall Lane or a nearby road, we can come to you. Main roads around Bracken Hill include the A62, so getting to you is simple. If you are just outside Bracken Hill, we cover Battyeford (1 mile south-east), Moor Top (1 mile north-east), Colne Bridge (1 mile south-west), Hartshead (1 mile north) and Roberttown (1 mile north-east). Further out, we also cover Huddersfield (4 miles south-west), Dewsbury (3 miles east), Batley (4 miles north-east), Cleckheaton (3 miles north), Heckmondwike (3 miles north-east) and Meltham (8 miles south-west).
Landmarks near Bracken Hill
Typical jobs here are in homes near Christ the King, Battyeford CofE (VC) Primary School and The Mirfield Free Grammar and the streets around them. The nearest railway station is Mirfield station, roughly 1.4 miles south-east of the centre. A little further out are Dewsbury Bus Museum (2.2 miles east) and Kirkwood Hospice (2.6 miles south). For a walk, there is Castle Hill.
How to care for the repair
Aftercare is simple:
- Fix dripping taps quickly
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
- Don’t leave bottles, razors or sponges standing on the surface
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
