Bradford · England
Bath Re-enamelling in Bradford Moor
Full bath re-enamelling and resurfacing at your home in Bradford Moor, with a one-year guarantee on every repair.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Wear marks under the taps
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- A quick wipe after use keeps limescale away
- Keep toiletries on a shelf rather than in the bath
- Avoid suction-cup mats
- Get any chip repaired quickly
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
About our bath re-enamelling in Bradford Moor
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. We work on pressed steel baths, acrylic baths and Victorian roll-tops, and people most often call us about a dull, rough surface that won’t come clean and a coloured bath you want in white.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Where
- Bradford Moor (BD3, BD4, BD2)
- County
- Bradford
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Bradford Moor
Bradford Moor is about 2 miles west of Pudsey, in Bradford. Our technicians come to homes and businesses in Bradford Moor, so nothing has to leave your home. We cover 140 places in Bradford, from the larger towns to small villages. You can also see our page for Leeds, about 7 miles away.
Jobs in BD3, BD4 and BD2 work the same way as everywhere else we cover. We regularly work on streets such as New Lane, Dick Lane and Gain Lane. With the A647 close by, Bradford Moor is easy for our technicians to reach. We also travel to Thornbury (1 mile east), Laisterdyke (1 mile south), Tyersal (1 mile south-east), Little Germany (1 mile west) and Cutler Heights (1 mile south). Within a short drive, we also cover Keighley (9 miles north-west), Bingley (6 miles north-west), Shipley (3 miles north-west), Baildon (4 miles north-west), Great Horton (3 miles south-west) and Upper Green (3 miles south-west).
Near you in Bradford Moor
Around Bradford Moor, we work in homes near Laisterdyke Leadership Academy, Dixons Marchbank Primary and St Margaret, among other places. Also close by are Peel Park (1.3 miles north-west), Feversham College (1.3 miles north-west), Bradford Mechanics' Institute Library (1.7 miles west) and The White Bear pub (under half a mile south). Bradford Moor’s nearest station is Bradford Interchange station, about 1.4 miles west of the centre. Nearby you will also find Westfield Bradford (1.4 miles west) and Leeds Road Fever Hospital (0.7 miles south-west). For a walk, there’s Heaton Reservoir Nature Reserve and Idle Hill.
What a repair can’t fix
We won’t take on work that will not last, so these are the limits:
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Why repair rather than replace?
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, with the bath ready the day after. Prices start from £350. Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Bradford Moor
- Colour mixed on the day to match
- Rooms protected and left tidy
- Fixed prices from your photos
- Repair technicians who travel to you, UK-wide
Take a look at our full price list or resurfacing vs replacement cost guide.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes most of the day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Keep children and pets away from the room on the day
- Let the surface dry out before the visit
- Have a window or extractor fan available
Ask for a price
To get a price, send a couple of pictures using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Read more
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Nearby places to Bradford Moor
More services for Bradford Moor
Signs you need bath re-enamelling in Bradford Moor
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
It’s worth getting a quote if you see:
- An old resurfacing that’s failing
- A roll-top that’s seen better days
- An outdated colour you’d like to change
- Worn patches where water runs and sits
What your quote should include
- The length of the guarantee and what it covers
- Whether there are any call-out or travel charges
- How your room will be protected
- Is the price fixed, and does it include VAT?
Landlord and trade work in Bradford Moor
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Questions from Bradford Moor
How do I book?
Some photos, your postcode and how to reach you. On the day, access to the room.
Can I get a quote without a visit?
Nearly always. If photos do not show enough, we will ask for another angle.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up and a photo of the entire item and your postcode.
Do you cover Bradford Moor?
Yes, we do. Technicians travel to Bradford Moor from across the region, and the price is the same as everywhere else.
Are there extra charges for Bradford Moor?
Travel is included in the price, and we charge the same wherever you are.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
About our accreditations · Every repair comes with a one-year guarantee.
