Wolverhampton · England
Bath re-enamelling & resurfacing in Bradmore, Wolverhampton
Bath re-enamelling across Bradmore and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Chips and rust in more than one place
- Thin, worn enamel in places
What affects the price in Bradmore
Prices start from £350. You won’t pay by the hour. The price is based on:
- Access to the area
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- The material, if you know it
- Details of any past repairs
- A coin beside the damage so we can judge size
- Where you are, by postcode
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you’re under no obligation.
Bath re-enamelling in Bradmore, done in place
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. If you are dealing with a bath that stays dull however much you clean it and worn patches where water runs and sits, we can help.
Big or small, you get the same one-year guarantee in Bradmore and across Wolverhampton.
- Where
- Bradmore (WV3, WV4)
- Region
- Wolverhampton
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Bradmore
What else we do in Bradmore
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Do not use the bath until it has fully cured
- Use washing-up liquid and a soft cloth
- Get any chip repaired quickly
- Rinse off hair dye, oils and bath bombs straight away
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Why repair rather than replace?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Prices start from £350. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Why choose Surface Doctor in Bradmore
- Technicians who travel to you, UK-wide
- Everything repaired in place
- A year’s guarantee on all work
- Honest advice, even when it means no job
Read our pricing or bath cost comparison.
Bradmore and the surrounding area
Bradmore is about 2 miles south-west of Wolverhampton, in Wolverhampton. Anywhere in WV3, we come to you. Bradmore is one of 96 towns and villages in Wolverhampton where we work. Our nearest city page is Birmingham, about 13 miles away.
Here we cover the WV3 and WV4 postcode area. From Owen Road, Hazel Road and Maple Road or anywhere nearby, a technician can come to you. We also cover the places around Bradmore: Merridale (1 mile north), Finchfield (1 mile west), Warstones (1 mile south-west), Merry Hill (1 mile south-west) and Graiseley (1 mile east). Larger places within reach include Bilston (4 miles east), Coseley (4 miles south-east), Wednesfield (3 miles north-east), New Invention (5 miles north-east), Gornal (4 miles south) and Tibbington (5 miles south-east).
What’s near Bradmore
We visit homes around St Luke's Church, Church of St Philip and The Gunmakers Arms, among other places. Other local landmarks include Merridale Primary School (0.5 miles north-east), St. Edmund's Catholic School (1 mile north), Bantock House Museum (less than half a mile north) and Royal Wolverhampton School (0.8 miles south-east). The closest station to Bradmore is Wolverhampton station, about 1.7 miles north-east. Nearby you’ll also find Wolves Museum (1.4 miles north-east) and Mander Centre (1.3 miles north-east). The countryside around Bradmore includes Peascroft Wood and Beacon Hill.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Acrylic that moves when you stand in it
- A bath split right through the body
- Leaks from fittings rather than the bath
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Common problems we fix in Bradmore
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Signs it’s time to call us include:
- An outdated colour you’d like to change
- Chips and rust in more than one place
- Wear marks under the taps
- A period or roll-top bath worth keeping
Questions to ask before booking
- If travel is included in the price
- How soon you can use it again
- What preparation is included
- The length of the guarantee and what it covers
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
FAQs for Bradmore
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long will the bath be out of use?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we will do the rest.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Do the materials smell?
There may be a mild smell during the work.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which usually takes the best part of a day. If we find something your pictures didn’t show, we will explain it before carrying on.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the following day.
Preparing for the visit
- Let us know about parking or access
- Point us to the nearest place to park
- Clear the area around the damage
Get a quote
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
