Wolverhampton · England
Bath Re-enamelling for Graiseley homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Graiseley. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Several chips and rust patches
- Stains that won’t shift
How we handle bath re-enamelling in Graiseley
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We work on cast iron baths, basins & shower trays and Victorian roll-tops, and common reasons people contact us are a bath that stays dull however much you clean it and a bath in a colour that no longer suits.
You get a one-year guarantee, the same in Graiseley as everywhere else we work.
- Where
- Graiseley (WV2, WV3, WV1)
- Region
- Wolverhampton
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. There is no area surcharge for Graiseley. What changes the price is:
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- The size and number of damaged areas
- How easy the damage is to reach
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
How to get a fixed quote
You can take the photos on your phone, there’s no need for anything special. Just ensure we can see:
- Good light, ideally daylight, without flash glare
- The material, if you know it
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
Email us a photo of the damage and one of the entire item, and tell us you are in Graiseley, and we will reply with a fixed quote.
Places near Graiseley
Also in Graiseley
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes the best part of a day, and we finish by cleaning up and talking you through the result.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
How to get a price
The quickest way to a price is to send two or three photos using our quote form or ring us. We will say immediately whether it can be repaired.
Advice
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Where we work around Graiseley
Graiseley is about 1 mile south of Wolverhampton, in Wolverhampton. Wherever you are in the WV2 postcode area, we come to you. Our repair technicians cover all 96 towns and villages across Wolverhampton, from the larger towns to small villages. We work right across the region, from Graiseley to Birmingham (about 13 miles away).
Here we cover the WV2, WV3 and WV1 postcode area. From Lea Road, Owen Road and Humber Road or anywhere nearby, a technician can come to you. If you are just outside Graiseley, we cover Blakenhall (1 mile south-east), Chapel Ash (1 mile north), All Saints (1 mile east), Bradmore (1 mile west) and Horseley Fields (1 mile north-east). Within a short drive, we also cover Bilston (3 miles east), Coseley (3 miles south-east), Wednesfield (3 miles north-east), New Invention (5 miles north-east), Gornal (4 miles south) and Perton (3 miles north-west).
Landmarks near Graiseley
We visit homes around Colton Hills Community School, St Chad & St Mark and Giffard Arms Public House and the streets around them. You’ll also find Graiseley Primary School (within half a mile south-east), Royal Wolverhampton School (under half a mile south), St Luke's Church (within half a mile south-east) and Bantock House Museum (0.8 miles west). For rail, the closest station is Wolverhampton station, roughly 1 mile north-east. Well-known places in the area include Wolves Museum (0.9 miles north) and Wolverhampton and Midland Counties Eye Infirmary (0.7 miles north-west). Green spaces nearby include Peascroft Wood and Beacon Hill.
Honest limits
A repair isn’t right for every job, including:
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We work for landlords, letting agents and housing providers in Graiseley as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Signs you need bath re-enamelling in Graiseley
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
The things clients generally mention when they call are:
- A coating lifting around the plughole
- Enamel that’s lost its shine and feels rough
- Stains that will not shift
- Chips and rust in more than one place
Questions to ask before you book
- What happens if they find more damage
- What protection goes down before work starts
- Who turns up on the day
- How the colour is matched
How to care for the repair
Aftercare is simple:
- Repair dripping taps early
- Use washing-up liquid and a soft cloth
- Don’t let dyes or oils sit on the finish
- Do not leave bottles, razors or sponges standing on the surface
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
FAQs for Graiseley
Do the materials smell?
Expect a mild smell while we are working.
Can I get a quote without a visit?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you come to Graiseley?
Yes, we do. Repair technicians travel to Graiseley from across the region, with no extra charge for travel.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Is my repair covered?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
