West Sussex · England
Bath Re-enamelling for Bramber homes
Damaged bath in Bramber? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- An old resurfacing that’s failing
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Bath re-enamelling in Bramber, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. We regularly repair pressed steel baths, cast iron baths and Victorian roll-tops, and common reasons people get in touch are staining under the taps and around the waste and a period or roll-top bath worth keeping.
Every job is backed for twelve months in Bramber and everywhere else. We return to put right any problem with the work.
- Where
- Bramber (BN44)
- County
- West Sussex
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
Once the work has cured, treat it gently:
- Wash away dyes and oils after use
- Respect the curing time we give you
- Avoid suction-cup mats
- Repair dripping taps early
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
How it works
We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the work takes a full day. At the end we talk you through the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
Get a quote
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
What we are called out for in Bramber
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Signs it’s time to call us include:
- A dull, rough surface that won’t come clean
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
- A peeling or bubbling previous coating
Questions to ask before you book
- What aftercare is recommended
- What preparation is included
- Who will actually do the work
- The length of the guarantee and what it covers
When a repair is not the answer
A repair is not always the answer, and we’d rather say so up front. We cannot fix:
- Problems we cannot see until an old finish comes off
- A bath split right through the body
- Holes rusted through the metal
Send us pictures and we will tell you honestly.
What we work on
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Bramber questions
Do you work in Bramber?
Yes, we do. We send a technician to Bramber for every job, with no extra charge for travel.
Can you repair several things at once?
Of course, and it normally saves money. Just add the extra items to your pictures and you will get one combined price.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote with dates.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Where we work around Bramber
Bramber is about 4 miles north-west of Shoreham-by-Sea, in West Sussex. Wherever you are in the BN44 postcode area, we come to you. Our repair technicians cover 371 places across West Sussex, from the larger towns to small villages. Our nearest city page is London, about 43 miles away.
Jobs in BN44 are booked in the same way as anywhere else. Jobs here include addresses on The Street, King's Stone Avenue and Saxon Road. If you’re just outside Bramber, we cover Steyning (1 mile west), Upper Beeding (1 mile east), Botolphs (1 mile south), Sompting (4 miles south) and Lancing (4 miles south). We also work in nearby towns such as Horsham (12 miles north), Worthing (6 miles south-west), Haywards Heath (12 miles north-east), Burgess Hill (10 miles north-east), Littlehampton (11 miles south-west) and Shoreham-by-Sea (4 miles south-east).
Landmarks near Bramber
Typical jobs here are in homes near Hillside Park (parke sa Hiniusang Gingharian), The Parish Church of St Nicholas and The Model Bakery The Norfolk Arms, among other places. Other local landmarks include Upper Beeding Primary School (0.6 miles east) and Steyning Grammar School (0.7 miles north-west). For rail, the closest station is Shoreham-By-Sea station, about 4.1 miles south-east. A little further out are Southlands Hospital (4.1 miles south-east) and Steyning Museum (within half a mile west). For a walk, there’s Steep Down and Woods Mill.
Landlords, agents and businesses in Bramber
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
If you manage property in Bramber, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Repairing versus replacing in Bramber
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, with the bath back in use the following day. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Why us?
- We leave the room as we found it
- Colours mixed by hand to suit your surface
- Nothing taken out or refitted
- No extra charge for your area
See our prices page and resurfacing vs replacement cost guide.
Towns and villages near Bramber
More services for Bramber
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- How hard the colour is to match
- What the surface is made of
- Access to the area
- What kind of damage it is
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Send pictures for a quote
We price nearly every job from photos. This is what to send:
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- A wider photo showing the whole bath
The quickest way to a price is to send a couple of pictures through our quote form or call us. We’ll say immediately if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
