Slough · England
Bath Re-enamelling in Brands Hill
Our repair technicians come to Brands Hill for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Thin, worn enamel in places
- Enamel that’s lost its shine and feels rough
What we’re called out for in Brands Hill
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The most common problems we are called about are:
- A coloured bath you want in white
- Worn patches where water runs and sits
- Stains that won’t shift
- An old resurfacing that is failing
Questions to ask before you book
- Whether the colour is mixed to match
- What preparation is included
- How your room will be protected
- What happens if the damage is worse than the pictures show
Bath re-enamelling at your home in Brands Hill
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We regularly repair Victorian roll-tops, acrylic baths and cast iron baths, and the jobs we see most are wear marks under the taps and stains that won’t shift.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Brands Hill (SL3)
- Area hub
- Slough
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Brands Hill
More services for Brands Hill
Looking after it afterwards
So the finish stays in good condition:
- Rinse off hair dye, oils and bath bombs immediately
- Do not leave bottles, razors or sponges standing on the surface
- Leave the bath for the full curing time before using it
- Avoid suction-cup mats
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Our work in Brands Hill
Brands Hill is about 3 miles south-west of West Drayton, in Slough. Wherever you are in the SL3 postcode area, a technician comes to you. Brands Hill is one of 31 towns and villages in Slough we cover. Our jobs stretch from Brands Hill to London (19 miles away).
Here we cover the SL3 postcode area. Other places close to Brands Hill include Horton (1 mile south), Colnbrook (1 mile east), Poyle (1 mile east), Sunnymeads (1 mile south-west) and Ditton (1 mile north-west). Further out, we also cover Slough (4 miles north-west), Cippenham (5 miles north-west), Chalvey (4 miles north-west), Britwell (5 miles north-west), Upton (3 miles north-west) and Burnham (6 miles north-west).
Near you in Brands Hill
Around Brands Hill, we work in homes near The Crown Public House And Attached Barn, Arthur Jacob Nature Reserve and Colnbrook Church of England Primary School and the streets around them. You’ll also find Langley Grammar School (1.4 miles north) and Church of St Michael (0.5 miles south). Brands Hill’s nearest station is Sunnymeads station, roughly 1.1 miles south-west. Nearby you will also find Windsor Castle (2.8 miles west) and Museum of Eton Life (3.1 miles west). Green spaces nearby include Uxbridge Moor and Staines Reservoirs.
How we price bath re-enamelling
Prices start from £350. Prices are worked out job by job. What matters most is:
- How many areas need work
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your photos
When you take your pictures, these tips help us give you a firm price:
- The material, if you know it
- Your postcode, so we can check dates
- Details of any past repairs
- Something in shot to show the size
If you are in Brands Hill and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Brands Hill questions
Is repairing better than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
What areas do you cover?
All of Slough, and the rest of the UK. There is no extra charge for travel.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and we will quote them together.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do you come to Brands Hill?
We do. We send a technician to Brands Hill for every job, and the price is the same as everywhere else.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
When we would advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- Plumbing leaks, which need a plumber
- A bath split right through the body
- A bath that is rusted through
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Brands Hill
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
For landlords and businesses
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
What happens on the day
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Plan for a full day. Before leaving, we tell you how long to leave it and how to look after it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the next day.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
- Keep pets and children out of the room while we work
Ask for a price
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Read more
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
About our accreditations · Every repair comes with a one-year guarantee.
