Slough · England
Bath re-enamelling & resurfacing in Horton, Slough
Bath re-enamelling across Horton and nearby, typically in one visit.
- Resurfacing from £350
- Thin, worn enamel in places
- A coating lifting around the plughole
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Store bottles off the bath
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
- Dry the bath after use to stop limescale
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Bath re-enamelling in Horton without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We work on cast iron baths, acrylic baths and basins & shower trays, and the jobs we see most are a period or roll-top bath worth keeping and a coloured bath you want in white.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back.
- Where
- Horton (SL3, TW19)
- Region
- Slough
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath re-enamelling in Horton
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up and a photo of the whole item with your SL3 postcode.
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Work for landlords and builders
Landlords, letting agents and housing providers in Horton use us as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
If you manage property in Horton, we will quote for several properties at once. Send pictures for each one and we will price them together.
The process
We turn up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the next day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Related advice
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Prices and what affects them
Resurfacing from £350. You will not pay by the hour. The price is based on:
- Doing more than one item at once
- The material and finish
- The type of damage
- The size and number of damaged areas
The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
Quotes from your pictures
Before you send photos, these tips help us give you a firm price:
- A clear, close picture of the problem area
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Repairing versus replacing in Horton
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Prices start from £350. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before you book.
Why Horton clients choose us
- One price list for the entire UK
- Dust sheets down, tidy finish
- CHAS, Constructionline and SafeContractor accredited
- One-year guarantee on every repair
Read our full price list or guide to resurfacing and replacement costs.
Horton and the surrounding area
Horton is about 3 miles north of Egham, in Slough. We visit customers in Horton and nearby villages, so there’s no workshop to go to. Horton is one of 31 towns and villages in Slough we cover. Our jobs stretch from Horton to London (about 19 miles away).
We cover every part of SL3 and TW19 and the streets around it. We regularly work on streets such as Stanwell Road, Bells Lane and Foundry Lane and the roads around them. Other places close to Horton include Brands Hill (1 mile north), Colnbrook (1 mile north-east), Sunnymeads (1 mile west), Poyle (1 mile north-east) and Wraysbury (1 mile south-west). Larger places within reach include Slough (4 miles north-west), Cippenham (5 miles north-west), Chalvey (4 miles north-west), Britwell (6 miles north-west), Upton (3 miles north-west) and Burnham (7 miles north-west).
Around Horton
Typical jobs here are in homes near Langley Grammar School, Arthur Jacob Nature Reserve and Colnbrook Church of England Primary School, among other places. Other local landmarks include Church of St Michael (under half a mile west) and The Five Bells Public House (within half a mile west). The nearest railway station is Sunnymeads station, roughly 1 mile west of the centre. Further afield, we also cover the area around Upton Hospital (3.3 miles north-west) and Windsor Castle (3 miles west). Open spaces near Horton include Staines Reservoirs.
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Places near Horton
What else we do in Horton
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
