Lincolnshire · England
Bath Re-enamelling for Brattleby homes
Problem with your bath in Brattleby? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
Brattleby questions
How do I get a price for bath re-enamelling in Brattleby?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Do you cover the entire of Lincolnshire?
The whole UK, including all of Lincolnshire. Just include your postcode and we will confirm dates.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Bath re-enamelling in Brattleby, done in place
We don’t move the bath, so the taps, tiles and plumbing aren’t touched. It typically takes one visit, with the bath ready to use the following day. We regularly repair basins & shower trays, acrylic baths and pressed steel baths, and common reasons people contact us are a period or roll-top bath worth keeping and several chips and rust patches.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Brattleby (LN1)
- Region
- Lincolnshire
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Brattleby
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
Landlords, letting agents and housing providers in Brattleby use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Towns and villages near Brattleby
Also in Brattleby
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Our work in Brattleby
Brattleby is about 6 miles north of Lincoln, in Lincolnshire. Across the LN1 area, a technician comes to you. Brattleby is one of 732 places in Lincolnshire we cover. We work right across the region, from Brattleby to Leeds (about 52 miles away).
Every address in LN1 is within our area, from the main roads to the quietest streets. We also travel to Aisthorpe (1 mile south), Scampton (1 mile south), Ingham (2 miles north), Fillingham (3 miles north) and Hackthorn (3 miles east). Within a short drive, we also cover Lincoln (6 miles south), Gainsborough (10 miles north-west), North Hykeham (9 miles south), Birchwood (7 miles south), Hykeham (9 miles south) and Ermine (5 miles south).
Local landmarks in Brattleby
Typical jobs here are in homes near Scampton Church of England Primary School and Church of St Cuthbert, among other places. The nearest railway station is Saxilby station, about 5 miles south-west.
When we would advise against a repair
To be straight with you, there are a few things a repair will not fix:
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that’s cracked right through
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
When to call us in Brattleby
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Keep an eye out for these signs:
- A roll-top that is seen better days
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- Chips and rust in more than one place
Comparing quotes
- What happens if they find more damage
- What preparation is included
- What aftercare is recommended
- Whether there are any call-out or travel charges
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We clean up when we are done and let you know when you can use it again.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can typically be used the day after.
Getting ready for the visit
- Open a window if you can
- Let us know about parking or access
- Keep pets and children out of the room while we work
Get a quote
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Related advice
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Keep suction mats out of the bath
- Don’t use the bath until it has fully cured
- Don’t leave bottles, razors or sponges standing on the surface
- Use washing-up liquid and a soft cloth
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
How we price bath re-enamelling
Prices start from £350. We price every job individually. The main factors are:
- How easy the damage is to reach
- The size and number of damaged areas
- The material
- Any earlier repairs that need removing first
Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Quotes from your pictures
You can take the pictures on your phone, there’s no need for anything special. Just ensure we can see:
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- A close-up of the damage, in focus
If you’re in Brattleby and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
About our accreditations · Every repair comes with a one-year guarantee.
