Northamptonshire · England
Bath re-enamelling & resurfacing in Braunston, Northamptonshire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Braunston. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A roll-top that is seen better days
- Worn patches where water runs and sits
Bath re-enamelling in Braunston, done in place
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We regularly repair pressed steel baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are a dull, rough surface that won’t come clean and worn patches where water runs and sits.
All our work is covered by our one-year guarantee, wherever you are in Northamptonshire.
- Where
- Braunston (NN11)
- Area hub
- Northamptonshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Braunston
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Avoid suction-cup mats
- A quick wipe after use keeps limescale away
- A dripping tap should be fixed promptly
- Keep toiletries on a shelf rather than in the bath
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Towns and villages near Braunston
Other services in Braunston
Questions from Braunston
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you come to Braunston?
We do. We send a technician to Braunston for every job, with no extra charge for travel.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What areas do you cover?
Everywhere in the UK, Braunston included. Travel is included in the price.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we will plan for it.
Repairing versus replacing in Braunston
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why Braunston clients choose us
- We will tell you if it’s not worth repairing
- Same prices wherever you are
- Colour-matched on site
- We leave the room as we found it
See our pricing or guide to resurfacing and replacement costs.
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
What we cannot put right
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Plumbing leaks, which need a plumber
- A bath that is rusted through
- Problems we can’t see until an old finish comes off
Send us pictures and we will tell you honestly.
What we work on
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Braunston. The price comes down to:
- Where the damage is and how we get to it
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
Most quotes are done from photos alone. To make it quick:
- Natural light rather than flash
- A picture taken from further back
- What it’s made of, if you know
- Any earlier repairs or coatings
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. There is no charge for the quote and you’re under no obligation.
How it works
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Allow the best part of a day from start to finish. Before leaving, we tell you when it can be used and how to care for it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the day after.
Preparing for the visit
- Keep children and pets away from the room on the day
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
Getting a price
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Advice
Braunston and nearby
Braunston is about 3 miles north-west of Daventry, in Northamptonshire. Clients in Braunston get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. We cover 364 places in Northamptonshire. Our jobs stretch from Braunston to Birmingham (about 31 miles away).
All of NN11 is covered. Local streets include Church Road, High Street and London Road. Close by, we cover Flecknoe (2 miles south-west), Grandborough (3 miles west), Staverton (3 miles south), Upper Shuckburgh (4 miles south-west) and Hellidon (5 miles south). Within a short drive, we also cover Northampton (14 miles east), Daventry (3 miles south-east), Towcester (15 miles south-east), Moulton (15 miles east), East Hunsbury (14 miles south-east) and Wootton (15 miles south-east).
Near you in Braunston
Typical jobs here are in homes near The Old Plough pub, Church of All Saints and Braunston Church of England Primary School and the streets around them. Other landmarks nearby include Daventry Museum (3.1 miles south-east) and Hospital of St. Cross (5.4 miles north-west). For a walk, there’s Borough Hill.
About our accreditations · Every repair comes with a one-year guarantee.
