Warwickshire · England
Bath Re-enamelling for Flecknoe homes
Bath re-enamelling for Flecknoe, without a refit. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
Bath re-enamelling at your home in Flecknoe
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. If you’re dealing with a dull, rough surface that won’t come clean and worn patches where water runs and sits, we can help, on basins & shower trays, cast iron baths and Victorian roll-tops alike.
Big or small, it’s backed by a one-year guarantee in Flecknoe and across Warwickshire.
- Area
- Flecknoe (CV23)
- Region
- Warwickshire
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Flecknoe
How long will the bath be out of use?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before and we’ll plan for it.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
Do you work in Flecknoe?
Yes. We cover the entire UK and travel to Flecknoe. Send pictures and we will quote, or call 0345 017 0787.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Repair or replace in Flecknoe?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Rooms protected and left tidy
- Repair technicians who travel to you, UK-wide
- No extra charge for your area
- Straight answers about what a repair can do
Take a look at our pricing and bath cost comparison.
The process
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for a full day from start to finish. Before we go, we’ll explain how long to leave it and how to care for it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Let us know which floor the room is on
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
How to get a price
If you are in Flecknoe and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
Looking after it afterwards
So the finish stays in good condition:
- Keep suction mats out of the bath
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
- A quick wipe after use keeps limescale away
Use mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
Our work in Flecknoe
Flecknoe is about 3 miles west of Daventry, in Warwickshire. Whether you are in the middle of Flecknoe or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 324 towns and villages across Warwickshire. Our nearest city page is Birmingham, about 31 miles away.
Jobs in CV23 work the same way as everywhere else we cover. From Vicarage Road and Bush Hill Lane or a nearby road, a technician can come to you. We also travel to Upper Shuckburgh (1 mile south-west), Staverton (2 miles south-east), Grandborough (2 miles north-west), Braunston (2 miles north-east) and Hellidon (3 miles south). Further out, we also cover Rugby (7 miles north), Warwick (14 miles west), Royal Leamington Spa (12 miles west), Leamington Spa (12 miles west), Kenilworth (15 miles west) and Southam (6 miles west).
What’s near Flecknoe
Our clients here include homes close to St Mark and the streets around them. Nearby you will also find Daventry Museum (3.8 miles east). For a walk, there is Badby Wood and Arbury Hill.
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- A cast iron or steel bath that is cracked right through
- A bath that’s rusted through
- Anything hidden under an old coating, until we remove it
Send us photos and we will tell you honestly before you book.
Materials we work on in Flecknoe
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
Common problems we fix in Flecknoe
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Get in touch if you’ve noticed:
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
- Chips and rust in more than one place
Comparing quotes
- What preparation is included
- A fixed price, and whether VAT is included
- How the room is protected while they work
- What aftercare is recommended
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Nearby places to Flecknoe
More services for Flecknoe
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- How many areas need work
- Unusual colours or finishes
- What kind of damage it is
- Doing more than one item at once
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send photos for a quote
Phone photos are fine, there’s no need for anything special. Just make sure we can see:
- Daylight if possible, and no flash reflection
- A picture taken from further back
- The postcode, so we can plan the visit
- The material, if you know it
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
