Windsor and Maidenhead · England

Bath Re-enamelling for Bray homes

Local bath re-enamelling for Bray: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Several chips and rust patches
  • Worn patches where water runs and sits
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Bray?

About our bath re-enamelling in Bray

Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s worn patches where water runs and sits and an outdated colour you’d like to change, we can normally put it right, whatever the material.

Whatever the size of the job, it’s backed by a one-year guarantee.

Location
Bray (SL6)
Region
Windsor and Maidenhead
Guarantee
One year on every repair
Quotes
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

What happens on the day

Arrival times are agreed in advance. On site, it takes a full day for most jobs. We leave the room clean.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Let us know about parking or access
  • Mention if the room is upstairs or in a flat

How to get a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Send photos for a quote

Advice

How we price bath re-enamelling

Prices start from £350. Every quote is fixed and free. What we take into account:

  • How many areas need work
  • The colour and finish to match
  • The type of damage
  • What the surface is made of

There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Getting a price from pictures

You can typically get a fixed price without us visiting. To help us price it:

  • Something in shot to show the size
  • A wider photo showing the entire bath
  • Details of any past repairs
  • One sharp close-up of the damage

Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.

DIY kit or professional repair?

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.

Questions from Bray

Will the price change on the day?

If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.

Does the bath have to be removed?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

How do I get a price for bath re-enamelling in Bray?

Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Do you cover the entire of Windsor and Maidenhead?

We work UK-wide, and that includes Bray. Our prices are the same everywhere.

It’s been repaired before. Can you still fix it?

Generally, yes. We remove the old repair before doing a new one.

Can you make a coloured bath white?

Yes, most people go for white. Tell us what you’d like when you ask for a quote.

Is a repair better than a new one?

Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Is the work guaranteed?

Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.

Repair or replace: which is better?

For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.

Why choose Surface Doctor in Bray

  • Rooms protected and left tidy
  • Work done at your home or business
  • Everything repaired in place
  • Fixed prices from your pictures

Read our full price list or bath cost comparison.

What we cannot put right

A repair is not always the answer, and we would rather say so up front. Repairs will not solve:

  • A poorly supported acrylic bath, until it’s firmed up
  • A bath that is rusted through
  • Damage hidden under a previous coating, until it’s stripped back

Send us photos and we’ll tell you honestly before booking.

What we work on

  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths
  • Cast iron baths

Landlord and trade work in Bray

For anyone letting property in or around Bray, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.

Landlords, letting agents and housing providers in Bray use us as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.

Our work in Bray

Bray is about 2 miles south-east of Maidenhead, in Windsor and Maidenhead. Our technicians come to homes and businesses in Bray and the surrounding area, so you don’t need to take anything anywhere. Our repair technicians cover 57 places across Windsor and Maidenhead, from the larger towns to small villages. We work right across the region, from Bray to London (26 miles away).

We cover every part of SL6 and the streets around it. That includes homes on High Street, Old Mill Lane and Beaufort Place and the roads around them. We also cover the places around Bray: Dorney Reach (1 mile east), Lake End (1 mile east), Taplow (2 miles north), Dorney (2 miles east) and Hitchambury (2 miles north-east). Further out, we also cover Windsor (4 miles south-east), North Ascot (6 miles south), Cookham (4 miles north), Furze Platt (3 miles north-west), Dedworth (3 miles south-east) and Broomhall (9 miles south).

Around Bray

Locally, our jobs take us to homes close to St Michael's Church, Braywick Park and Desborough College, among other places. Nearby too are The Fat Duck pub (within half a mile west) and Dorney School (0.7 miles east). For rail, the closest station is Taplow station, about 1.3 miles north-east of the centre. Nearby you’ll also find The Reitlinger Bequest Museum (1.1 miles north) and Windsor Castle (4.3 miles south-east). For a walk, there is Bray Pit and Taplow Lake.

Map of Bray © OpenStreetMap contributors

Aftercare tips

To keep it looking its best for years:

  • Stick to gentle, non-abrasive cleaners
  • A dripping tap should be fixed promptly
  • Avoid suction-cup mats
  • Respect the curing time we give you

Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

Repairs by material

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.