Windsor and Maidenhead · England
Bath Re-enamelling for Furze Platt homes
Fixed-price bath re-enamelling in Furze Platt and the surrounding area, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- A coloured bath you want in white
- Staining under the taps and around the waste
Bath re-enamelling in Furze Platt without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. We regularly repair cast iron baths, acrylic baths and Victorian roll-tops, and common reasons people contact us are lots of chips and rust spots and a coloured bath you want in white.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Furze Platt (SL6)
- County
- Windsor and Maidenhead
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Repairing versus replacing in Furze Platt
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.
Why us?
- One visit for most repairs
- Colours mixed by hand to suit your surface
- A fixed quote before booking
- CHAS and Constructionline accredited
Read our prices page and bath cost comparison.
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Fix dripping taps quickly
- Wash away dyes and oils after use
- Respect the curing time we give you
- Do not leave a chip unrepaired
A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Furze Platt and nearby
Furze Platt is about 1 mile north of Maidenhead, in Windsor and Maidenhead. Our technicians come to customers in Furze Platt, so nothing has to leave your home. Our repair technicians cover 57 places across Windsor and Maidenhead. You can also see our page for London, about 28 miles away.
Our visits in SL6 work the same way as everywhere else we cover. Whether you live on Camden Road, Harrow Lane and Bridle Road or anywhere nearby, a technician can come to you. If you are just outside Furze Platt, we cover Maidenhead (1 mile south), Pinkneys Green (1 mile west), Cookham Dean (2 miles north), Cookham (2 miles north) and Boyn Hill (2 miles south). Further out, we also cover Windsor (6 miles south-east), North Ascot (8 miles south), Dedworth (6 miles south-east), Broomhall (11 miles south-east), South Ascot (10 miles south) and Old Windsor (9 miles south-east). As one of the bigger places in Windsor and Maidenhead, Furze Platt sees plenty of our work.
Near you in Furze Platt
Locally, our jobs take us to homes close to Church of St Peter, Furze Platt Senior School and The Crauford Arms and the streets around them. Also close by are Braywick Park (2 miles south-east), St Piran's School (0.5 miles south-east) and Furze Platt Junior School (within half a mile south-west). Furze Platt has its own railway station: Furze Platt station. A little further out are The Reitlinger Bequest Museum (1.7 miles south-east) and St Mark's Hospital (0.8 miles south-west). Open spaces near Furze Platt include Weycock Hill and Taplow Lake.
Also near Furze Platt
More services for Furze Platt
What bath re-enamelling costs
Prices start from £350. You’ll know the full cost before booking. We look at:
- How much damage there is
- What the surface is made of
- Any earlier repairs that need removing first
- Unusual colours or finishes
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Getting a price from photos
Photographing the damage takes a minute. Please include:
- Something in shot to show the size
- Details of any past repairs
- One picture of the whole bath
- The material, if you know it
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
How the visit works
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes the best part of a day in most cases. The room is left tidy.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
How to get a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Furze Platt: your questions answered
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Are there extra charges for Furze Platt?
We do not add a call-out fee. The fixed quote covers the visit and the work.
How much does bath re-enamelling cost in Furze Platt?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
What happens once I’ve sent pictures?
We review the pictures and send a fixed quote and the next dates we have.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Furze Platt.
Can you repair something that’s been repaired before?
Typically, yes. The old repair comes out first.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, photos and access details and we will arrange it.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
When we would advise against a repair
Some jobs are not right for a repair, for example:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that is rusted through
- A bath split right through the body
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
