Derby · England
Bath re-enamelling & resurfacing in Breadsall, Derby
Local bath re-enamelling for Breadsall: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An old resurfacing that’s failing
- Thin, worn enamel in places
How we handle bath re-enamelling in Breadsall
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include stains that won’t shift and several chips and rust patches, on cast iron baths, Victorian roll-tops and acrylic baths.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Breadsall (DE21)
- Region
- Derby
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Common problems we fix in Breadsall
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Clients usually contact us about:
- Wear marks under the taps
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
- A roll-top that’s seen better days
Questions to ask before you book
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the photos show
- Whether a trained technician does the job
- How your room will be protected
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
About Breadsall
Breadsall is about 3 miles north of Derby, in Derby. We visit homes and businesses in Breadsall and nearby villages, so nothing has to leave your home. We work in all 31 towns and villages across Derby, from the larger towns to small villages. You can also see our page for Birmingham, about 38 miles away.
We cover every part of DE21 and the streets around it. That includes homes on Station Road, Darwin Fields Close and Brookfields Drive. We also cover the places around Breadsall: Oakwood (1 mile south-east), Little Eaton (1 mile north), Darley Abbey (1 mile south-west), Allestree (1 mile west) and Morleymoor (1 mile north-east). Further out, we also cover Derby (3 miles south), Shelton Lock (5 miles south), Spondon (3 miles south-east), New Zealand (3 miles south-west), Sunny Hill (5 miles south-west) and Pear Tree (4 miles south).
What’s near Breadsall
Typical jobs here are in homes near Breadsall CofE VC Primary School, Church of All Saints and Da Vinci Academy, among other places. The closest station to Breadsall is Derby station, about 2.6 miles south. Further afield, we also cover the area around Derbion (2.5 miles south) and Horston Castle (2.3 miles north).
How the visit works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a full day. We tidy up before we leave and let you know when you can use it again.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
Getting a price
To get a price, send a couple of photos using our quote form or call us. We’ll say right away whether it can be repaired.
Related advice
Places near Breadsall
What else we do in Breadsall
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before booking. We look at:
- Doing more than one item at once
- The material
- Unusual colours or finishes
- Access to the area
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed price
You can normally get a fixed price without us visiting. To make it quick:
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
- Details of any past repairs
- Natural light rather than flash
Upload photos of the damage and a wider shot of the whole item, with your DE21 postcode, and we will reply with a fixed quote.
Landlord and trade work in Breadsall
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
How to care for the repair
So the finish stays in good condition:
- Avoid suction-cup mats
- Fix dripping taps quickly
- Stick to gentle, non-abrasive cleaners
- Rinse off hair dye, oils and bath bombs straight away
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Your questions about bath re-enamelling in Breadsall
Do you cover the entire of Derby?
All of Derby, and the rest of the UK. There’s no extra charge for travel.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Will there be a smell?
There can be some smell while we work. It clears as the materials cure.
Repair or replace in Breadsall?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Breadsall
- Nothing taken out or refitted
- We leave the room as we found it
- One visit for most repairs
- Fixed prices from your pictures
Take a look at our prices page and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
