Derbyshire · England
Bath Re-enamelling for Breamfield homes
Damaged bath in Breamfield? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A peeling or bubbling previous coating
Bath re-enamelling at your home in Breamfield
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We regularly repair basins & shower trays, cast iron baths and pressed steel baths, and common reasons people get in touch are lots of chips and rust spots and a roll-top that’s seen better days.
Whatever the size of the job, you get the same one-year guarantee.
- Area
- Breamfield (DE4)
- County
- Derbyshire
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Common questions in Breamfield
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can pets and children be at home?
Just keep them out of the work area. We will let you know when it’s safe to use again.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Can I get a quote without a visit?
Nearly always. If photos don’t show enough, we will ask for another angle.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Avoid suction-cup mats
- A quick wipe after use keeps limescale away
- Fix dripping taps quickly
- Leave the bath for the full curing time before using it
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- Access to the area
- Doing more than one item at once
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed quote
Most quotes are done from photos alone. To help us price it:
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
- A clear, close picture of the problem area
- Your postcode, so we can check dates
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Also near Breamfield
Other services in Breamfield
How it works
Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a full day from start to finish. Before we go, we’ll explain how long to leave it and how to care for it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Let us know which floor the room is on
- Let us know if it has been repaired before
- Let the surface dry out before the visit
Get a quote
For a price in Breamfield, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Read more
Repairing versus replacing in Breamfield
Replacing a bath generally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the day after. Prices start from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Why Breamfield clients choose us
- Everything repaired in place
- One visit for most repairs
- We come to you, anywhere in the UK
- Colour-matched on site
See our full price list and bath cost comparison.
Covering Breamfield
Breamfield is about 5 miles south of Matlock, in Derbyshire. Jobs in Breamfield are booked in like any other job: a fixed quote from photos, then a visit to do the work. Breamfield is one of 532 places in Derbyshire we cover. Our nearest city page is Manchester, about 39 miles away.
Every address in DE4 is within our area. Jobs here include addresses on Hey Lane and St Helen's Lane. If you are just outside Breamfield, we cover Wirksworth (1 mile north-west), Bolehill (1 mile north), Shottle (3 miles south), Idridgehay (3 miles south) and Belper Lane End (3 miles south-east). Larger places within reach include Chesterfield (12 miles north-east), Ilkeston (13 miles south-east), Belper (5 miles south-east), Heanor (10 miles south-east), Ripley (7 miles east) and Staveley (15 miles north-east).
Local landmarks in Breamfield
Locally, our jobs take us to homes close to Anthony Gell School, Church of St Teresa of Lisieux and George House and the streets around them. Also close by are Wirksworth Junior School (0.6 miles north-west) and Alderwasley Hall Sixth Form Centre (1.2 miles south). The closest station to Breamfield is Whatstandwell station, roughly 2.3 miles east of the centre. Nearby you’ll also find Willersley Castle (2.4 miles north) and National Stone Centre (1.4 miles north-west). The countryside around Breamfield includes Alport Height and Wyver Lane Nature Reserve.
What a repair can’t fix
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- A bath split right through the body
- A bath that’s rusted through
- Leaking taps or wastes (a plumber’s job)
Send us photos and we will tell you honestly.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
