Derbyshire · England
Bath Re-enamelling in Wirksworth
Our repair technicians come to Wirksworth for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
FAQs for Wirksworth
What happens next?
We come back with a fixed quote, usually with dates to choose from. There is no obligation to book.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
What information do you need?
Just pictures, your postcode and a contact number. On the day, access to the room.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
How we handle bath re-enamelling in Wirksworth
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include a coloured bath you want in white and enamel that’s lost its shine and feels rough, on Victorian roll-tops, pressed steel baths and basins & shower trays.
All our work is covered by our one-year guarantee, wherever you are in Derbyshire.
- Area
- Wirksworth (DE4)
- Area hub
- Derbyshire
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
The process
We work cleanly and quietly. Protection goes down first, then the work takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Read more
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Wirksworth and nearby
Wirksworth is about 6 miles north-west of Belper, in Derbyshire. Jobs in Wirksworth are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Our repair technicians cover all 532 towns and villages in Derbyshire, from the larger towns to small villages. Our jobs stretch from Wirksworth to Manchester (about 38 miles away).
Postcode districts we cover here: DE4. Streets in the area include Warmbrook, Nether Gardens and Foggs Entry, all of which we cover. Main roads around Wirksworth include the B5023 and B5035, which makes travel easy. If you’re just outside Wirksworth, we cover Breamfield (1 mile south-east), Bolehill (1 mile north-east), Shottle (3 miles south-east), Idridgehay (3 miles south) and Ireton Wood (4 miles south). Larger places within reach include Chesterfield (12 miles north-east), Ilkeston (13 miles south-east), Belper (6 miles south-east), Heanor (10 miles south-east), Ripley (7 miles east) and Staveley (15 miles north-east).
Local landmarks in Wirksworth
Typical jobs here are in homes near Wirksworth CofE Infant School, St Mary's Church and Anthony Gell School, among other places. You will also find Alderwasley Hall Sixth Form Centre (1.4 miles south) and Hope and Anchor pub (less than half a mile north). For rail, the closest station is Cromford station, roughly 2.5 miles north-east. Further afield, we also cover the area around National Stone Centre (0.9 miles north) and Whitworth Hospital (4.9 miles north). Open spaces near Wirksworth include Alport Height and Wyver Lane Nature Reserve.
What bath re-enamelling costs
Resurfacing from £350. There is no area surcharge for Wirksworth. What changes the price is:
- The type of damage
- Access to the area
- Previous DIY repairs that have to come out
- How many items we do on one visit
Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- A wider photo showing the entire bath
- Details of any past repairs
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
If you’re in Wirksworth and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Rinse off hair dye, oils and bath bombs straight away
- Have chips seen to early
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
Dry the bath after use if possible, and rinse away any product left on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Should you replace it?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling renews the entire surface with the bath left where it is. Prices start from £350. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Wirksworth
- One visit for most repairs
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
- Rooms protected and left tidy
Take a look at our prices page or resurfacing vs replacement cost guide.
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
What we can’t put right
Honesty matters more than a booking, so here’s what a repair will not do:
- Holes rusted through the metal
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
Also near Wirksworth
What else we do in Wirksworth
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
