Derbyshire · England
Bath Repair for Breamfield homes
Damaged bath in Breamfield? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- A kit repair that didn’t last
- Chips on the rim or sides
Bath repair in Breamfield, done in place
You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. Whether it’s cracks in an acrylic bath and rust by the waste and overflow, we can help, on acrylic, cast iron enamel and whirlpool & spa baths alike.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Where
- Breamfield (DE4)
- Region
- Derbyshire
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Breamfield
Breamfield is about 5 miles south of Matlock, in Derbyshire. Jobs in Breamfield are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We cover all 532 towns and villages across Derbyshire. You can also see our page for Manchester, about 39 miles away.
Here we cover the DE4 postcode area. Local streets include Hey Lane and St Helen's Lane. Neighbouring places we cover include Wirksworth (1 mile north-west), Bolehill (1 mile north), Shottle (3 miles south), Idridgehay (3 miles south) and Belper Lane End (3 miles south-east). Larger places within reach include Chesterfield (12 miles north-east), Ilkeston (13 miles south-east), Belper (5 miles south-east), Heanor (10 miles south-east), Ripley (7 miles east) and Staveley (15 miles north-east).
Local landmarks in Breamfield
Typical jobs here are in homes near Anthony Gell School, Church of St Teresa of Lisieux and George House. Also close by are Wirksworth Junior School (0.6 miles north-west) and Alderwasley Hall Sixth Form Centre (1.2 miles south). For rail, the closest station is Whatstandwell station, about 2.3 miles east of the centre. Well-known places in the area include Willersley Castle (2.4 miles north) and National Stone Centre (1.4 miles north-west). Not far away are Alport Height and Wyver Lane Nature Reserve.
What we cannot put right
A few problems are outside what a surface repair can do:
- Acrylic cracks with no access behind them
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Rust that has eaten right through a steel bath
Send us photos and we will tell you honestly before booking.
Materials we work on in Breamfield
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
Nearby places to Breamfield
Other services in Breamfield
Should you replace it?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why us?
- We come to you, anywhere in the UK
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
- We will tell you if it’s not worth repairing
Take a look at our pricing and bath cost comparison.
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Stick to mild cleaners and a soft cloth
- Check that an acrylic bath does not move when you stand in it
- Put a towel in the bath if you are working above it
- Don’t leave a fresh chip for long
There is nothing special to do after a repair, beyond gentle cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
The process
Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for a morning or an afternoon from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the day after.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
- Let us know if it has been repaired before
How to get a price
If you’re in Breamfield and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Related advice
When to call us in Breamfield
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal lets water in, and rust follows.
Clients normally contact us about:
- Cracks in an acrylic bath
- Scuffs and scratches in the surface
- Rust spots around the plughole
- Damage beneath the taps
What to look for in a quote
- What prep work is covered
- When it can be used again
- What the guarantee covers, and for how long
- If travel is included in the price
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
What bath repair costs
Prices start from £95. We do not charge extra for travel to Breamfield. The price comes down to:
- Unusual colours or finishes
- Access to the area
- What the surface is made of
- The type of damage
Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
Phone pictures are fine. Just ensure we can see:
- Details of any past repairs
- One picture of the whole bath
- Any details about the material
- One sharp close-up of the damage
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Questions from Breamfield
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Is there a guarantee?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Can you repair a hole in a bath?
Usually. Send us a picture of the hole and one from under the bath if you can.
Do you cover Breamfield?
Yes. We cover the whole UK and come to Breamfield. Send pictures and we will quote, or call 0345 017 0787.
About our accreditations · Every repair comes with a one-year guarantee.
