Surrey · England
Bath Re-enamelling in Brewer Street
We travel to Brewer Street for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Chips and rust in more than one place
- A coloured bath you want in white
Covering Brewer Street
Brewer Street is about 2 miles south of Caterham, in Surrey. Jobs in Brewer Street are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Our repair technicians cover 395 places in Surrey, from the larger towns to small villages. We work right across the region, from Brewer Street to London (17 miles away).
Every address in RH1 is covered. We regularly work on streets such as Whitehill Lane and Brewer Street and the roads around them. We also cover the places around Brewer Street: Nutfield (1 mile south-west), Chaldon (2 miles north), South Merstham (2 miles west), Merstham (2 miles north-west) and South Nutfield (2 miles south-west). Larger places within reach include Epsom (9 miles north-west), Horley (6 miles south-west), Redhill (3 miles west), Ewell (10 miles north-west), Reigate (4 miles west) and Dorking (10 miles west).
Around Brewer Street
Our customers here include homes close to Bletchingley Village Primary School, Merstham Park School and The Prince Albert Public House and the streets around them. Also close by are Oakhyrst Grange School (1.3 miles north), Kitchen Copse (within half a mile north-east) and Church of St Mary the Virgin (0.8 miles south). The nearest railway station is Merstham station, roughly 2.2 miles west of the centre. Nearby you’ll also find East Surrey Museum (2.2 miles north-east) and The Belfry (3.1 miles west). For a walk, there is Mercers Lake and Bay Pond.
How we handle bath re-enamelling in Brewer Street
Re-enamelling is a one-day job for most baths, and you can use the bath the following day. Taps, tiles, panels and plumbing all stay in place. We regularly repair basins & shower trays, pressed steel baths and cast iron baths, and the jobs we see most are brown or grey marks that don’t clean off and a coating lifting around the plughole.
We stand behind the work with a one-year guarantee.
- Where
- Brewer Street (RH1)
- County
- Surrey
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- Most jobs done in one visit
- Everything repaired in place
- A fixed quote before booking
- Straight answers about what a repair can do
Take a look at our full price list and guide to resurfacing and replacement costs.
How the visit works
We agree an arrival time beforehand, so you know when to expect us. On site, it takes most of the day for most jobs. We leave the room clean and you’ll know when it can be used.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the following day.
How to prepare
- Ensure the area is dry
- Open a window if you can
- Let us know if it has been repaired before
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and no obligation.
Read more
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
What a repair cannot fix
We would rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Landlords, agents and businesses in Brewer Street
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We regularly work with letting and managing agents. Send the address, photos and access details and we will arrange it.
When to call us in Brewer Street
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
You may need us if you’ve spotted:
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
- Several chips and rust patches
Questions to ask before booking
- Whether cleaning and preparation are in the price
- If travel is included in the price
- What happens if the damage is worse than the photos show
- A fixed price, and whether VAT is included
Nearby places to Brewer Street
Other services in Brewer Street
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Use washing-up liquid and a soft cloth
- A quick wipe after use keeps limescale away
- Leave the bath for the full curing time before using it
- Never use suction bath mats
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Your questions about bath re-enamelling in Brewer Street
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Which areas do you work in?
Across the UK, so Brewer Street is covered. Our prices are the same everywhere.
Do you cover Brewer Street?
Yes. We cover the entire UK and travel to Brewer Street. Send pictures and we’ll quote, or call 0345 017 0787.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
How much does bath re-enamelling cost in Brewer Street?
Resurfacing from £350. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
About our accreditations · Every repair comes with a one-year guarantee.
