Surrey · England
Bath Re-enamelling in South Merstham
Local bath re-enamelling for South Merstham: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Chips and rust in more than one place

How we handle bath re-enamelling in South Merstham
The bath stays where it is, so your taps, tiles and plumbing are left alone. It generally takes one visit, with the bath ready to use the following day. Whether it’s a bath in a colour that no longer suits and brown or grey marks that don’t clean off, we can help.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- South Merstham (RH1)
- Area hub
- Surrey
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026

What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Landlords, agents and businesses in South Merstham
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Landlords, letting agents and housing providers in South Merstham use us as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
What we are called out for in South Merstham
Hard water speeds up the wear, and abrasive cleaners do the most damage.
It’s worth getting a quote if you see:
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
- A coloured bath you want in white
- Staining under the taps and around the waste
What to look for in a quote
- How changes to the job are handled
- If travel is included in the price
- What aftercare is recommended
- Is the price fixed, and does it include VAT?
How it works
The work is clean and fairly quiet. We protect the area first, then the work takes a full day. Before we leave, we explain how soon it can be used and how to care for it.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
- Point us to the nearest place to park
Ask for a price
If you’re in South Merstham and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Questions from South Merstham
How long will the bath be out of use?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Which areas do you work in?
We cover the whole UK, including South Merstham and the rest of Surrey. Just include your postcode and we will offer you dates.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Surrey.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can I add another job to the visit?
Of course, and it typically saves money. Send pictures of everything together and you’ll get one combined price.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What bath re-enamelling costs
Resurfacing from £350. There is no charge for travel to South Merstham. The price depends on:
- The material
- Whether old repairs or coatings need taking off
- The type of damage
- How much damage there is
We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
When you take your pictures, a few simple things make all the difference:
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- Something in shot to show the size
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why book with us
- Work done at your home or business
- Honest advice, even when it means no job
- Dust sheets down, tidy finish
- One visit for most repairs
Read our full price list and guide to resurfacing and replacement costs.
South Merstham and nearby
South Merstham is about 2 miles north-east of Redhill, in Surrey. We travel to homes and businesses in South Merstham and nearby villages, so there’s no workshop to go to. South Merstham is one of 395 towns and villages in Surrey where we work. Our nearest city page is London, about 17 miles away.
Our technicians cover all of RH1 and the streets around it. You will find streets such as Station Road South, London Road South and Station Road, and we cover them all. If you are just outside South Merstham, we cover Merstham (1 mile north), Holmethorpe (1 mile south-west), Gatton (1 mile west), Nutfield (2 miles south-east) and Redhill (2 miles south-west). Within a short drive, we also cover Epsom (7 miles north-west), Horley (6 miles south), Ewell (8 miles north-west), Reigate (3 miles south-west), Walton-on-Thames (14 miles north-west) and Caterham (3 miles north-east).
Around South Merstham
In South Merstham, that means homes near All Saints', Merstham Primary School and East Surrey College and the streets around them. Also close by are Nutfield Marshes (1 mile south) and Merstham Park School (within half a mile south-east). There’s a railway station in South Merstham itself: Merstham station. Well-known places in the area include Bletchingley Castle (2.3 miles south-east) and The Belfry (1.7 miles south-west). Open spaces near South Merstham include Colley Hill and Mercers Lake.
Nearby places to South Merstham
Also in South Merstham
When we’d advise against a repair
Some jobs aren’t right for a repair, including:
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that’s cracked right through
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Dry the bath after use to stop limescale
- Avoid suction-cup mats
- Wash away dyes and oils after use
- Do not leave bottles, razors or sponges standing on the surface
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.

