Norfolk · England
Bath re-enamelling & resurfacing in Brisley, Norfolk
Full bath re-enamelling and resurfacing in Brisley, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Worn patches where water runs and sits
Bath re-enamelling in Brisley, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. If you’re dealing with a bath in a colour that no longer suits and several chips and rust patches, we can generally put it right, whatever the material.
A one-year guarantee comes as standard.
- Area
- Brisley (NR20)
- Region
- Norfolk
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Brisley
Hard water speeds up the wear, and abrasive cleaners do the most damage.
You may need us if you’ve spotted:
- Several chips and rust patches
- An old resurfacing that is failing
- Staining under the taps and around the waste
- An outdated colour you’d like to change
Questions to ask before booking
- Whether the price is fixed and includes VAT
- If travel is included in the price
- What happens if they find more damage
- What aftercare is recommended
For landlords and businesses
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
Landlords, letting agents and housing providers in Brisley use us as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Honest limits
It helps to know what we can’t do:
- Problems we cannot see until an old finish comes off
- A bath split right through the body
- Leaks from fittings rather than the bath
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Repairing versus replacing in Brisley
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the day after. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. You will see the full price before booking, with nothing added on the day.
What you get with us
- Repair technicians who travel to you, UK-wide
- One visit for most repairs
- Rooms protected and left tidy
- CHAS and Constructionline accredited
See our pricing and guide to resurfacing and replacement costs.
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- How hard the colour is to match
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- How many areas need work
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed quote
Two or three clear photos are typically enough. It helps if you send:
- A wider photo showing the entire bath
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Places near Brisley
What else we do in Brisley
The process
Your technician turns up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take the best part of a day, and we leave the room as we found it.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the next day.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Ensure the area is dry
- Tell us about parking, stairs or access
Get a quote
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Covering Brisley
Brisley is about 6 miles north of Dereham, in Norfolk. Across the NR20 area, we carry out the work at your property. Brisley is one of 797 towns and villages in Norfolk we cover.
Every address in NR20 is covered, from the main roads to the quietest streets. Streets in the area include Gateley Road, Church Street and School Road, and we cover them all. If you are just outside Brisley, we cover Stanfield (1 mile south-west), East Bilney (2 miles south), Horningtoft (2 miles north-west), Hungry Hill (2 miles south) and Whissonsett (2 miles north-west). Larger places within reach include Dereham (6 miles south), Watton (13 miles south), Swaffham (11 miles south-west), Taverham (14 miles east), Fakenham (5 miles north) and Aylsham (15 miles east).
Landmarks near Brisley
Typical jobs here are in homes near The Bell pub, Church of St Bartholomew and Brisley Church of England Primary Academy and the streets around them. Further afield, we also cover the area around Mileham Castle (2.7 miles south-west) and Gressenhall Farm and Workhouse (3.3 miles south). For a walk, there is Beacon Hill and Hoe Rough.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Brisley: your questions answered
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a picture of the whole item with your NR20 postcode.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Can you quote from photos?
Generally, yes. Clear pictures let us give you a fixed quote without visiting.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Can you do more than one item on the same visit?
Of course, and it normally saves money. Just add the extra items to your photos and we will quote them together.
About our accreditations · Every repair comes with a one-year guarantee.
