Norfolk · England
Bath re-enamelling & resurfacing in Aylsham, Norfolk
Full bath re-enamelling and resurfacing for homes and businesses in Aylsham and across Norfolk. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Thin, worn enamel in places
How to care for the repair
Once the work has cured, treat it gently:
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
- Don’t use the bath until it has fully cured
- Avoid suction-cup mats
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Bath re-enamelling at your home in Aylsham
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Typical jobs include worn patches where water runs and sits and a bath that stays dull however much you clean it, across acrylic baths, pressed steel baths and cast iron baths.
Whatever the size of the job, it’s backed by a one-year guarantee in Aylsham and across Norfolk.
- Where
- Aylsham (NR11)
- County
- Norfolk
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow the best part of a day. Before leaving, we tell you how long to leave it and how to look after it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
- Keep a parking space free if you can
Getting a price
If you are in Aylsham and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Nearby places to Aylsham
Other services in Aylsham
Why repair rather than replace?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day, with the bath back in use the day after. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Aylsham customers choose us
- One price list for the whole UK
- One visit for most repairs
- Nothing taken out or refitted
- A year’s guarantee on all work
Take a look at our pricing and guide to resurfacing and replacement costs.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- Previous DIY repairs that have to come out
A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
How to get a fixed price
Before you send photos, a few simple things make all the difference:
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- A wider photo showing the whole bath
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and no obligation.
Common questions in Aylsham
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
What happens once I’ve sent pictures?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
When to call us in Aylsham
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Keep an eye out for these signs:
- Staining under the taps and around the waste
- An outdated colour you’d like to change
- An old resurfacing that is failing
- Several chips and rust patches
Questions to ask before booking
- Whether the price covers travel
- What preparation is included
- Whether a trained technician does the job
- What happens if the damage is worse than the pictures show
When we would advise against a repair
Before booking, it’s worth knowing the limits:
- A cast iron or steel bath that is cracked right through
- A bath that is rusted through
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Aylsham and the surrounding area
Aylsham is about 11 miles north of Norwich, in Norfolk. Clients in Aylsham get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Aylsham is one of 797 places in Norfolk where we work.
Postcode districts we cover here: NR11. Whether you live on Station Road, Sears Close and Blofields Loke or anywhere nearby, a technician can come to you. You’ll find Aylsham on the B1145, which makes it straightforward to reach. Other places close to Aylsham include Marsham (2 miles south), Little London (2 miles south), Burgh next Aylsham (2 miles south-east), Tuttington (2 miles east) and Brampton (2 miles south-east). Larger places within reach include Norwich (11 miles south), Dereham (15 miles south-west), Sprowston (10 miles south), Thorpe St Andrew (12 miles south), North Walsham (6 miles east) and Sheringham (10 miles north).
Around Aylsham
Around Aylsham, we work in homes near Aylsham High School, Bure Valley School and Parish Church of Saint Michael. Nearby you’ll also find Burgh next Aylsham (1.3 miles east).
About our accreditations · Every repair comes with a one-year guarantee.
