Gloucestershire · England
Bath re-enamelling & resurfacing in Brockworth, Gloucestershire
Fixed-price bath re-enamelling in Brockworth and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
Questions from Brockworth
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How long does re-enamelling take?
Most baths are done in a day, ready the following day. We’ll confirm timings when we quote.
Is there any odour?
There can be some smell while we work. It fades as everything cures.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we will plan for it.
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
How we handle bath re-enamelling in Brockworth
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. Our repair technicians work on pressed steel baths, cast iron baths and basins & shower trays, and common reasons people contact us are chips and rust in more than one place and thin, worn enamel in places.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.
- Location
- Brockworth (GL3)
- Region
- Gloucestershire
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
It helps to know what we can’t do:
- A bath that is rusted through
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Repair or replace in Brockworth?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why us?
- We leave the room as we found it
- Typically one visit, start to finish
- No extra charge for your area
- Everything repaired in place
Take a look at our full price list and resurfacing vs replacement cost guide.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Covering Brockworth
Brockworth is about 3 miles east of Gloucester, in Gloucestershire. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. Brockworth is one of 470 towns and villages in Gloucestershire we cover. Our jobs stretch from Brockworth to Birmingham (about 45 miles away).
Our technicians cover all of GL3. Whether you live on Cherryblossom Square, Caligae Square and Seabrook Road or anywhere nearby, we can come to you. Nearby, we also work in Coopers Edge (1 mile west), Hucclecote (1 mile west), Cooper's Hill (1 mile south), Little Witcombe (1 mile east) and Upton St Leonards (2 miles south-west). Within a short drive, we also cover Cheltenham (5 miles north-east), Gloucester (3 miles west), Stroud (8 miles south), Tewkesbury (10 miles north), St Paul's (5 miles north-east) and Cirencester (13 miles south-east). As one of the bigger places in Gloucestershire, Brockworth sees plenty of our work.
What’s near Brockworth
We visit homes around Cross Hands pub, Brockworth Primary Academy and Henley Bank High School, among other places. Nearby too are Church of St George (0.5 miles north) and Lobley's Drive Park (1.4 miles west). Brockworth’s nearest station is Gloucester station, about 3.5 miles north-west of the centre. Nearby you will also find Emmas Grove (2.9 miles east) and Gloucester Transport Museum (4 miles west). Not far away are Cooper's Hill.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
How it works
Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and we start. Allow the best part of a day, and we’ll keep you posted as we go.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Avoid using the area for a few hours before we arrive
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
How to get a price
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Wash away dyes and oils after use
- Do not leave bottles, razors or sponges standing on the surface
- Do not use the bath until it has fully cured
- Have chips seen to early
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Also near Brockworth
Also in Brockworth
How we price bath re-enamelling
Prices start from £350. We don’t charge extra for travel to Brockworth. The price depends on:
- Access to the area
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- The material
Our prices are the same across the UK, so there’s no premium for Brockworth. The job itself decides the price: how much damage, what it’s made of and how many items.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what to send:
- One sharp close-up of the damage
- Something in shot to show the size
- One picture of the entire bath
- Any earlier repairs or coatings
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say straight away if a repair is the right fix.
For landlords and businesses
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
We work for landlords, letting agents and housing providers in Brockworth as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
About our accreditations · Every repair comes with a one-year guarantee.
