Bridgend · Wales
Bath Re-enamelling in Bron-y-waun
Bath re-enamelling in Bron-y-waun without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Chips and rust in more than one place
About our bath re-enamelling in Bron-y-waun
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include brown or grey marks that don’t clean off and a dull, rough surface that won’t come clean, in cast iron baths, acrylic baths and basins & shower trays.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Bron-y-waun (CF34)
- County
- Bridgend
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Bron-y-waun
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
People usually call us after spotting one of these:
- A coloured bath you want in white
- Stains that won’t shift
- Wear marks under the taps
- A coating lifting around the plughole
What to look for in a quote
- How changes to the job are handled
- How the room is protected while they work
- Aftercare advice
- Who turns up on the day
Prices and what affects them
Prices start from £350. You will not pay by the hour. The price is based on:
- Where the damage is and how we get to it
- Whether we combine several jobs
- Unusual colours or finishes
- How much damage there is
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from pictures
You can usually get a fixed quote without us visiting. To help us price it:
- A coin or ruler next to the damage for scale
- A photo taken from further back
- Any details about the material
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Should you replace it?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- Free fixed quotes from pictures
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- Honest advice, even when it means no job
See our pricing or bath cost comparison.
Landlords, agents and businesses in Bron-y-waun
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
Other services in Bron-y-waun
Honest limits
We will not take on work that will not last, so here’s what a repair cannot put right:
- Holes rusted through the metal
- A bath split right through the body
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
How the visit works
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It generally takes the best part of a day, and you can get on with other things while we are there.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Clear the area around the damage
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
How to get a price
If you’re in Bron-y-waun and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
How to care for the repair
Once the work has cured, treat it gently:
- Wipe the bath dry after use in hard water areas
- Do not use the bath until it has fully cured
- Keep suction mats out of the bath
- Don’t leave bottles, razors or sponges standing on the surface
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
FAQs for Bron-y-waun
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
How durable is a resurfaced bath?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Is there a guarantee?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
What happens next?
We review the pictures and send a fixed quote and the next dates we have.
Our work in Bron-y-waun
Bron-y-waun is about 1 mile south-east of Maesteg, in Bridgend. Jobs in Bron-y-waun are booked in like any other job: a fixed price from your photos, then a visit to do the work. Bron-y-waun is one of 91 places in Bridgend where we work.
We work across CF34. That includes homes on Garn Road, Crown Road and Cwmdu Road. We also travel to Garth (1 mile south), Maesteg (1 mile north-west), Nantyffyllon (2 miles north-west), Spelter (2 miles north) and Dyffryn (2 miles north-west). Further out, we also cover Bridgend (7 miles south-east), Porthcawl (9 miles south), Newcastle Higher (7 miles south), Ynysawdre (5 miles south-east), Pencoed (8 miles south-east) and Cefn Glas (7 miles south).
Landmarks near Bron-y-waun
Locally, our jobs take us to homes close to The Odd Fellows Rest pub, Garth Primary School and Catholic Church of Our Lady and St Patrick and the streets around them. There’s a railway station in Bron-y-waun itself: Maesteg (Ewenny Road) station. Nearby you will also find Llwdarth (0.6 miles south-west) and Maesteg Community Hospital (1.3 miles west). For a walk, there’s Garth Hill.
About our accreditations · Every repair comes with a one-year guarantee.
