Powys · Wales
Bath re-enamelling & resurfacing in Bronllys, Powys
We travel to Bronllys for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- A peeling or bubbling previous coating
Signs you need bath re-enamelling in Bronllys
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Signs it’s time to call us include:
- Lots of chips and rust spots
- A roll-top that’s seen better days
- Thin, worn enamel in places
- Enamel that is lost its shine and feels rough
Comparing quotes
- Whether the price is fixed and includes VAT
- When it can be used again
- What protection goes down before work starts
- How to care for the finish
About our bath re-enamelling in Bronllys
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Taps, tiles, panels and plumbing all stay in place. Common call-outs are for an old resurfacing that’s failing and a coloured bath you want in white, in basins & shower trays, Victorian roll-tops and pressed steel baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Bronllys (LD3)
- County
- Powys
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How to care for the repair
Looking after the surface is easy, and it makes a real difference:
- Keep suction mats out of the bath
- Rinse off hair dye, oils and bath bombs right away
- Clean with a soft cloth and mild detergent
- Do not leave bottles, razors or sponges standing on the surface
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Also near Bronllys
Also in Bronllys
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Prices and what affects them
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- The material and finish
- The colour and finish to match
- The type of damage
- How many items we do on one visit
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Quotes from your pictures
It only takes a minute to photograph the damage. Please include:
- Details of any past repairs
- Any details about the material
- Natural light rather than flash
- The postcode, so we can plan the visit
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Our work in Bronllys
Bronllys is about 15 miles north of Ebbw Vale, in Powys. Across the LD3 area, a technician comes to you. We work in 234 places in Powys. You can also see our page for Birmingham, about 66 miles away.
Here we cover the LD3 postcode area. You’ll find streets such as Dôl y Llys, Dol y Porthmon and Clos y Berllan, all of which we cover. Nearby, we also work in Pont-y-wal (1 mile west), Castle Green (1 mile south-east), Llyswen (2 miles north), Aberllynfi (2 miles north-east) and Bochrwyd (2 miles north). Within a short drive, we also cover Brecon (7 miles south-west), Llanfair-ym-Muallt (12 miles north-west), Llanfaes (8 miles south-west), Crughywel (11 miles south-east), Pendre (7 miles south-west) and Llanelwedd (12 miles north-west).
Near you in Bronllys
Our customers here include homes close to Trevecca College Library, Ysgol y Mynydd Du and The Cock Hotel. Also close by are St Mary's Church (within half a mile south) and Gwernyfed High School (2.4 miles north-east). Other landmarks nearby include Bronllys Castle (0.5 miles south-east) and Tre-goed a Felindre (2.9 miles east). Not far away are Mintfield Hill and Pwll Brechfa.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For landlords and businesses
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Questions from Bronllys
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Do you resurface freestanding baths?
Yes, often. We resurface the inside, and the outside can be refinished too.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can you price it without visiting?
In nearly every case. If pictures do not show enough, we will ask for another angle.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens next?
We review the pictures and send a fixed quote.
What a repair can’t fix
It helps to know what we cannot do:
- A bath split right through the body
- Acrylic that moves when you stand in it
- Problems we cannot see until an old finish comes off
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
How it works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Clear the area around the damage
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
Get a quote
To get a price, send two or three photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
