Powys · Wales
Bath Re-enamelling for Pendre homes
Full bath re-enamelling and resurfacing in Pendre, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- An original cast iron bath that needs restoring
About our bath re-enamelling in Pendre
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Common call-outs are for a coloured bath you want in white and a period or roll-top bath worth keeping, across pressed steel baths, cast iron baths and acrylic baths.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.
- Area
- Pendre (LD3)
- Area hub
- Powys
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Pendre
Pendre is about 1 mile north of Brecon, in Powys. Across the LD3 area, we carry out the work at your property. We work in all 234 towns and villages across Powys, from the larger towns to small villages. Our nearest city page is Birmingham, about 73 miles away.
Our visits in LD3 are booked in the same way as anywhere else. Whether you live on Bell Lane, The Avenue and Market Street or anywhere nearby, we can come to you. Other places close to Pendre include Brecon (1 mile south), Llanfaes (1 mile south-west), Llanddew (1 mile north-east), Llanfrynach (3 miles south-east) and Talachddu (3 miles north-east). Larger places within reach include Llanfair-ym-Muallt (14 miles north), Crughywel (13 miles south-east), Talgarth (8 miles north-east), Llanelwedd (14 miles north), Llangynidr (9 miles south-east) and Llanwrtyd Wells (15 miles north-west).
Near you in Pendre
We visit homes around Priory Church in Wales School, Roman Catholic Church of St Michael and Bull's Head pub, among other places. Further afield, we also cover the area around St Mary (0.7 miles south-east) and Brecon War Memorial Hospital (under half a mile south-east). Green spaces nearby include Ty Mawr Pool and Slwch Tump.
Prices and what affects them
Resurfacing from £350. We price every job individually, from your pictures. The main factors are:
- Doing more than one item at once
- The material and finish
- Previous DIY repairs that have to come out
- The size and number of damaged areas
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed price
You can usually get a fixed quote without us visiting. To help us price it:
- The material, if you know it
- Where you are, by postcode
- Something in shot to show the size
- Details of any past repairs
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Landlord and trade work in Pendre
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We carry out planned and one-off repairs for housing associations and facilities teams in Powys and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
How to look after the repair
So the finish stays in good condition:
- Have chips seen to early
- Don’t let dyes or oils sit on the finish
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Repairing versus replacing in Pendre
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the entire surface without moving it. Our bath re-enamelling starts from £350. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
What you get with us
- Nothing taken out or refitted
- A year’s guarantee on all work
- Rooms protected and left tidy
- No extra charge for your area
Take a look at our prices page or guide to resurfacing and replacement costs.
The process
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for most of the day. Before leaving, we tell you when it can be used and how to care for it.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Let the surface dry out before the visit
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Related advice
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
What else we do in Pendre
Pendre: your questions answered
How long does re-enamelling last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
How do I get a price for bath re-enamelling in Pendre?
Prices start from £350. Every job gets a fixed price from your pictures. Send a close-up and a picture of the entire item with your LD3 postcode.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Do you resurface freestanding baths?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Do you need bath re-enamelling in Pendre?
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is generally as strong as ever.
Send us a photo if you notice any of these:
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
- Several chips and rust patches
- An outdated colour you’d like to change
What your quote should include
- Whether they match the colour on site
- How your room will be protected
- If travel is included in the price
- How soon you can use it again
About our accreditations · Every repair comes with a one-year guarantee.
