Worcestershire · England
Bath Re-enamelling for Brook End homes
Full bath re-enamelling and resurfacing for homes and businesses in Brook End and across Worcestershire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Bath re-enamelling in Brook End, done in place
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. If you are dealing with lots of chips and rust spots and an outdated colour you’d like to change, we can help.
All our work comes with our one-year guarantee.
- Location
- Brook End (WR5)
- Area hub
- Worcestershire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Brook End
What else we do in Brook End
What affects the price in Brook End
Resurfacing from £350. There is no charge for travel to Brook End. The price comes down to:
- How much damage there is
- How hard the colour is to match
- Any earlier repairs that need removing first
- Whether we combine several jobs
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
We price nearly every job from pictures. This is what to send:
- The material, if you know it
- A wider photo showing the entire bath
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
How it works
We turn up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes the best part of a day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
- Let the surface dry out before the visit
Get a quote
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Repair or replace in Brook End?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why book with us
- Colour-matched on site
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- We come to you, anywhere in the UK
Read our pricing and resurfacing vs replacement cost guide.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Brook End as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Housing associations and facilities teams use us for planned and reactive repairs in Worcestershire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Do you need bath re-enamelling in Brook End?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Signs it’s time to call us include:
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
Before booking anyone
- How long the guarantee is and what it covers
- How long it needs to cure
- Whether the price covers travel
- How your room will be protected
Common questions in Brook End
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Which areas do you work in?
We work UK-wide, and that includes Brook End. Prices do not change with location.
How do I get a price for bath re-enamelling in Brook End?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
About Brook End
Brook End is about 3 miles south of Worcester, in Worcestershire. Customers in Brook End get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Our repair technicians cover all 376 towns and villages across Worcestershire, from the larger towns to small villages. We work right across the region, from Brook End to Birmingham (26 miles away).
Jobs in WR5 work the same way as everywhere else we cover. From Brookend Lane and Broomhall or a nearby road, a technician can come to you. Nearby, we also work in Kempsey (1 mile south-west), Napleton (1 mile south), Draycott (1 mile south-west), St Peter the Great (2 miles north) and Callow End (2 miles west). We also work in nearby towns such as Worcester (3 miles north), Redditch (15 miles north-east), Bromsgrove (14 miles north-east), Great Malvern (5 miles west), Droitwich Spa (8 miles north) and Evesham (12 miles east).
Local landmarks in Brook End
Typical jobs here are in homes near Blessed Edward Oldcorne Catholic College, Walter de Cantelupe Inn and Church of St Mary. The closest station to Brook End is Worcestershire Parkway station, roughly 1.8 miles east of the centre. Well-known places in the area include CrownGate Shopping Centre (3.2 miles north) and Worcester Castle (2.8 miles north).
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Dry the bath after use to stop limescale
- Clean with a soft cloth and mild detergent
- Repair dripping taps early
- Never use suction bath mats
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
