Dudley · England
Bath re-enamelling & resurfacing in Broom Hill, Dudley
Problem with your bath in Broom Hill? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath in a colour that no longer suits
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- Technicians who travel to you, UK-wide
- Most jobs done in one visit
- Colours mixed by hand to suit your surface
- No need to remove anything
See our pricing and resurfacing vs replacement cost guide.
Bath re-enamelling in Broom Hill, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We regularly repair cast iron baths, pressed steel baths and acrylic baths, and the jobs we see most are a dull, rough surface that won’t come clean and a bath in a colour that no longer suits.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Broom Hill (DY9)
- Region
- Dudley
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Keep suction mats out of the bath
- Do not use the bath until it has fully cured
- Repair dripping taps early
- Have chips seen to early
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Landlords, agents and businesses in Broom Hill
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
If you manage property in Broom Hill, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Access to the area
- The material
- What kind of damage it is
- The size and number of damaged areas
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
You can take the pictures on your phone, there’s no need for anything special. Make sure they show:
- Any details about the material
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
If you are in Broom Hill and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Do you need bath re-enamelling in Broom Hill?
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
You may need us if you’ve spotted any of these:
- A coloured bath you want in white
- An original cast iron bath that needs restoring
- Wear marks under the taps
- An old resurfacing that’s failing
What your quote should include
- What happens if the damage is worse than the pictures show
- How soon you can use it again
- How long the guarantee is and what it covers
- Who turns up on the day
Questions from Broom Hill
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Can a failed resurfacing be redone?
Usually, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Can you repair something that is been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
How long will the bath be out of use?
Usually one day, with the bath ready the following day. A badly pitted bath can need a second day.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
How much does bath re-enamelling cost in Broom Hill?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Where we work around Broom Hill
Broom Hill is about 4 miles north-west of Bromsgrove, in Dudley. From the centre of Broom Hill to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Broom Hill is one of 63 towns and villages in Dudley we cover. Our nearest city page is Birmingham, about 12 miles away.
All of DY9 is covered. You’ll find streets such as Waystone Lane and Dordale Road. We also cover the places around Broom Hill: Drayton (1 mile north-west), Dordale (1 mile south-east), Tanwood (1 mile south-west), Belbroughton (1 mile north) and Hartle (1 mile north-east). Within a short drive, we also cover Dudley (9 miles north), Halesowen (6 miles north-east), Stourbridge (5 miles north), Kingswinford (8 miles north), Sedgley (10 miles north) and Brierley Hill (7 miles north).
Near you in Broom Hill
Our customers here include homes close to Church of the Holy Trinity, Belbroughton CofE Primary School and The Robin Hood pub and the streets around them. Broom Hill’s nearest station is Blakedown station, roughly 3 miles north-west. Nearby you will also find Castlebourne folly (1.9 miles north-east) and Norton Collection Museum (3.9 miles south-east). Open spaces near Broom Hill include Walton Hill and Chaddesley Woods National Nature Reserve.
Towns and villages near Broom Hill
Also in Broom Hill
What we cannot put right
A repair isn’t right for every job, including:
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
- Problems we cannot see until an old finish comes off
Send us photos and we’ll tell you honestly.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
The process
We agree an arrival time beforehand. Once we’re there, the work takes most of the day for most jobs. The room is left tidy.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
- Clear the area around the damage
Get a quote
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
