Dudley · England

Bath Re-enamelling in Dordale

Full bath re-enamelling and resurfacing for homes and businesses in Dordale and across Dudley. Send pictures for a free, fixed quote.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • Brown or grey marks that don’t clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Dordale

Covering Dordale

Dordale is about 3 miles north-west of Bromsgrove, in Dudley. We travel to customers in Dordale, so there’s no workshop to go to. We work in all 63 towns and villages across Dudley, from the larger towns to small villages. Our jobs stretch from Dordale to Birmingham (12 miles away).

All of DY9 is covered, from the main roads to the quietest streets. Whether you live on Dordale Road and Woodcote Lane or a nearby road, we can come to you. We also cover the places around Dordale: Broom Hill (1 mile north-west), Dodford (1 mile south-east), Woodcote Green (1 mile south), Tanwood (1 mile west) and Outwood (2 miles south-west). We also work in nearby towns such as Dudley (10 miles north), Halesowen (7 miles north), Stourbridge (6 miles north), Kingswinford (9 miles north), Sedgley (11 miles north) and Brierley Hill (7 miles north).

Around Dordale

For rail, the closest station is Blakedown station, about 3.8 miles north-west of the centre. Other landmarks nearby include Castlebourne folly (2 miles north-east) and Norton Collection Museum (3.1 miles south-east). Green spaces nearby include Walton Hill and Chaddesley Woods National Nature Reserve.

Map of Dordale © OpenStreetMap contributors

Bath re-enamelling in Dordale, done in place

We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. We’re frequently asked to fix chips and rust in more than one place and enamel that’s lost its shine and feels rough, on acrylic baths, pressed steel baths and cast iron baths.

We stand behind the work with a one-year guarantee.

Location
Dordale (DY9)
Area hub
Dudley
Cover
A year, on every repair
Quotes
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Repairing versus replacing in Dordale

Replacing a bath typically involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.

Why choose Surface Doctor in Dordale

  • CHAS, Constructionline and SafeContractor accredited
  • Every repair guaranteed for a year
  • We come to you, anywhere in the UK
  • A fixed quote before you book

See our pricing or bath cost comparison.

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

Signs you need bath re-enamelling in Dordale

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

These are the problems we’re asked about most:

  • A coloured bath you want in white
  • Wear marks under the taps
  • Brown or grey marks that don’t clean off
  • A bath that stays dull however much you clean it

What to look for in a quote

  • How your room will be protected
  • How the colour is matched
  • What happens if the damage is worse than the photos show
  • Whether the price covers travel

How to compare quotes

What your bath is made of matters

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.

What happens on the day

A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Plan for a full day. Before leaving, we tell you how long to leave it and how to care for it.

  1. We mask and protect the room and ventilate it.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. We key the surface and put on a bonding primer.
  4. We spray several coats of new enamel finish.
  5. Once cured, normally by the following day, the bath is ready.

Getting ready for the visit

  • Mention if the room is upstairs or in a flat
  • Let the surface dry out before the visit
  • Keep children and pets away from the room on the day

Get a quote

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

Send photos for a quote

Related advice

What a repair cannot fix

Some jobs aren’t right for a repair, for example:

  • Leaks from fittings rather than the bath
  • Steel that has corroded right through
  • A bath split right through the body

If in doubt, send photos and we’ll say what we think before you book.

Materials we repair

  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays

Dordale: your questions answered

It’s been repaired before. Can you still fix it?

Yes, regularly. Removing the old work can add time, and that’s in the quote.

Can you fix a peeling bath coating?

Normally, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.

How long will the bath be out of use?

Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.

Will the bath be moved?

No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.

Can I get a quote without a visit?

Typically, yes. A close-up and a wider photo are enough to give a fixed price.

Can you re-enamel a roll-top bath?

Yes, frequently. We resurface the inside, and the outside can be refinished too.

Can pets and children be at home?

Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.

Is there a guarantee?

All our work carries a one-year guarantee. We’ll explain what it covers when we quote.

Landlord and trade work in Dordale

We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Get any chip repaired quickly
  • Use washing-up liquid and a soft cloth
  • Respect the curing time we give you
  • A dripping tap should be fixed promptly

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.