Worcestershire · England
Bath Re-enamelling for Tanwood homes
Full bath re-enamelling and resurfacing in Tanwood, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- A dull, rough surface that won’t come clean
What we are called out for in Tanwood
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Contact us if you’ve noticed:
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
- Stains that won’t shift
- A period or roll-top bath worth keeping
Comparing quotes
- Aftercare advice
- Whether they match the colour on site
- A fixed quote, and whether VAT is included
- Whether the price covers travel
About our bath re-enamelling in Tanwood
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. We regularly repair cast iron baths, Victorian roll-tops and acrylic baths, and common reasons people contact us are a bath that stays dull however much you clean it and an old resurfacing that’s failing.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.
- Where
- Tanwood (DY10)
- Area hub
- Worcestershire
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. We charge the same across the UK, including Tanwood. What changes the price is:
- How many areas need work
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
How to get a fixed price
You can take the photos on your phone. Just ensure we can see:
- Any earlier repairs or coatings
- Something in shot to show the size
- A wider photo showing the entire bath
- Daylight if possible, and no flash reflection
To get a price, send two or three photos using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- A bath that is rusted through
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
Common questions in Tanwood
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Tanwood and the surrounding area
Tanwood is about 4 miles north-west of Bromsgrove, in Worcestershire. Wherever you are in the DY10 postcode area, we carry out the work at your property. We work in all 376 towns and villages in Worcestershire. Our nearest city page is Birmingham, about 13 miles away.
Every address in DY10 is within our area. Other places close to Tanwood include Bluntington (1 mile west), Chaddesley Corbett (1 mile south-west), Drayton (1 mile north), Woodrow (1 mile north-west) and Broom Hill (1 mile north-east). We also work in nearby towns such as Worcester (12 miles south), Redditch (10 miles south-east), Kidderminster (5 miles west), Bromsgrove (4 miles south-east), Droitwich Spa (8 miles south) and Stourport-on-Severn (6 miles west).
Local landmarks in Tanwood
Around Tanwood, we work in homes near The Robin Hood pub, Chaddesley Corbett Endowed Primary School and Church of St Cassian and the streets around them. The closest station to Tanwood is Blakedown station, roughly 3 miles north-west of the centre. Nearby you’ll also find Barnsley Hall Hospital (3.7 miles east) and Castlebourne folly (2.8 miles north-east). Not far away are Chaddesley Woods National Nature Reserve and Walton Hill.
Repair or replace in Tanwood?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.
What you get with us
- Most jobs done in one visit
- We will tell you if it’s not worth repairing
- No extra charge for your area
- A fixed quote before booking
Read our prices page and guide to resurfacing and replacement costs.
Towns and villages near Tanwood
More services for Tanwood
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What happens on the day
The work is clean and fairly quiet. We protect the area first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to look after it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the following day.
Preparing for the visit
- Let us know about parking or access
- Open a window if you can
- Keep pets and children out of the room while we work
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
