East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in Brough, East Riding of Yorkshire
Local bath re-enamelling for Brough: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- Brown or grey marks that don’t clean off
About our bath re-enamelling in Brough
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re often asked to fix stains that won’t shift and a period or roll-top bath worth keeping, across pressed steel baths, Victorian roll-tops and acrylic baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Brough (HU15)
- Area hub
- East Riding of Yorkshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Signs you need bath re-enamelling in Brough
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, typically first under the taps and around the waste.
Look out for any of the following:
- A coloured bath you want in white
- An old resurfacing that’s failing
- Stains that will not shift
- Worn patches where water runs and sits
What to look for in a quote
- Who turns up on the day
- Aftercare advice
- When it can be used again
- What protection goes down before work starts
Our work in Brough
Brough is about 9 miles west of Kingston upon Hull, in East Riding of Yorkshire. Whether you are in the middle of Brough or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 299 places in East Riding of Yorkshire, from the larger towns to small villages. Our jobs stretch from Brough to Leeds (41 miles away).
Postcode districts we cover here: HU15. Jobs here include addresses on Calder Square, Station Road and Birch Place and the roads around them. Other places close to Brough include Elloughton (1 mile north), Welton (1 mile north-east), Melton (1 mile east), Brantingham (2 miles north) and North Ferriby (2 miles east). Larger places within reach include Beverley (10 miles north-east), Goole (13 miles west), Hessle (5 miles east), Cottingham (7 miles north-east), Market Weighton (10 miles north-west) and Hedon (15 miles east). Being one of East Riding of Yorkshire’s larger places, Brough sees plenty of our work.
Landmarks near Brough
Locally, our jobs take us to homes close to Green Dragon Public House, All Saints and Welton Primary School. The nearest railway station is Brough station, about 0.6 miles west of the centre. Further afield, we also cover the area around Cave Castle (3.4 miles north-west) and Hull and East Riding Hospital (5.3 miles east). Green spaces nearby include Far Ings National Nature Reserve.
Brough: your questions answered
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Do you come to Brough?
Yes. We cover the whole UK and travel to Brough. Send pictures and we’ll quote, or call 0345 017 0787.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Wash away dyes and oils after use
- A quick wipe after use keeps limescale away
- Avoid suction-cup mats
- Get any chip repaired quickly
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Places near Brough
What else we do in Brough
When a repair isn’t the answer
To be straight with you, there are a few things a repair won’t fix:
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
Send us photos and we will tell you honestly.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Should you replace it?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day, with the bath back in use the day after. Prices start from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Brough customers choose us
- Every repair guaranteed for a year
- We leave the room as we found it
- No extra charge for your area
- No need to remove anything
Read our prices page or guide to resurfacing and replacement costs.
What affects the price in Brough
Prices start from £350. There’s no charge for travel to Brough. The price depends on:
- Where the damage is and how we get to it
- The material and finish
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.
How to get a fixed quote
We price nearly every job from photos. This is what we need:
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- The material, if you know it
- The postcode, so we can plan the visit
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
How it works
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes a full day for most jobs. The room is left tidy and you’ll know when it can be used.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the following day.
Getting ready for the visit
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
Getting a price
The quickest way to a price is to send two or three photos using our quote form or ring us. We will tell you honestly whether it can be repaired.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
